CHANNEL configuration of Crucial C300 HELP PLEASE

Moderators: Roman_TS, Filipp_TS, Sergey_TS

User avatar
datasalvage
Newbie
Posts: 24
Joined: 17.06.10
Reputation: 0 / (0)

CHANNEL configuration of Crucial C300 HELP PLEASE

Postby datasalvage » 21.08.23, 06:58

Hello guys does somebody know the CHANNEL configuration for this SSD drive??
short story dead pcb and maybe dead controller.
i reballed and soldered the NAND chips on the donor pcb and finally i can turn in on with full id on pc-3000.... however some nand flash ID cannot be readed :(
Roman helped me with many advices and i did reballed AGAIN all the NAND CHIPS ... now only CHANNEL 5 cannot be readed ...i would like to reball it but unfortunatelly i cant figure out what phisical NAND is the CHANNEL 5" since on the PCb nothing is written"....
PLEASE if you have experience with same or simila ssd help me.... this is a crucial 128GB with 16 NAND chips
Attachments
Front.jpg
Front.jpg (889.63 KiB) Viewed 2131 times
Back.jpg
Back.jpg (238.82 KiB) Viewed 2131 times

User avatar
datasalvage
Newbie
Posts: 24
Joined: 17.06.10
Reputation: 0 / (0)

Re: CHANNEL configuration of Crucial C300 HELP PLEASE

Postby datasalvage » 21.08.23, 07:24

CHANNELS
Attachments
Crucial C300 CHANNELS.jpg
Crucial C300 CHANNELS.jpg (127.6 KiB) Viewed 2128 times


Return to “C300 Series”

Who is online

Users browsing this forum: No registered users and 3 guests