CRUCIAL MX500

Moderators: Roman_TS, Filipp_TS, Sergey_TS


techchef1
Newbie
Posts: 18
Joined: 10.01.17
Reputation: 0 / (0)

CRUCIAL MX500

Postby techchef1 » 14.01.21, 05:42

Hi ,
Drive comes ready ,When we read the id its gone busy ..Kindky guide me to recovery the data

thanks

User avatar
Roman_TS
Site Admin
Posts: 685
Joined: 09.02.11
Reputation: 25 / (252)

Re: CRUCIAL MX500

Postby Roman_TS » 14.01.21, 09:14

Hello.

BSY state means a serious firmware corruption inside the SSD. At this moment we can deal only with a few drives which are based on Marvell controller, where BSY state might be eliminated. They are:

Sandisk Ultra II (Marvell 88SS9187/88/89 and 88SS1074)
Sandisk SSD Plus (88SS1074)
WD Blue (88SS1074)
Plextor M9e (NVME 88SS1093)

Other Marvell-based drives have only limited support. We can rebuild translator and get access to data only if drive returns ID and stays in READY state.
Here is the list of supported drives:

https://blog.acelaboratory.com/pc-3000- ... dated.html
With best regards
ACELab Technical Support
ts.acelab.eu.com
blog.acelab.eu.com


Mehboob
Newbie
Posts: 12
Joined: 13.11.18
Reputation: 0 / (0)

Re: CRUCIAL MX500

Postby Mehboob » 01.02.21, 13:18

do pc3000 has support for SM2258H crucial mx500?
if yes help me out.

User avatar
Roman_TS
Site Admin
Posts: 685
Joined: 09.02.11
Reputation: 25 / (252)

Re: CRUCIAL MX500

Postby Roman_TS » 01.02.21, 17:29

Mehboob wrote:Source of the post do pc3000 has support for SM2258H crucial mx500?
if yes help me out.

We can work with SM2258XT modification of Crucial MX500, while SM2258H modification is different and not supported.
With best regards
ACELab Technical Support
ts.acelab.eu.com
blog.acelab.eu.com


CrazyDoctor
Newbie
Posts: 1
Joined: 10.10.11
Reputation: 0 / (0)

Re: CRUCIAL MX500

Postby CrazyDoctor » 02.11.21, 15:03

Roman_TS wrote:Source of the post
Mehboob wrote:Source of the post do pc3000 has support for SM2258H crucial mx500?
if yes help me out.

We can work with SM2258XT modification of Crucial MX500, while SM2258H modification is different and not supported.


Hello,
Does this SM2258H support already?

User avatar
Roman_TS
Site Admin
Posts: 685
Joined: 09.02.11
Reputation: 25 / (252)

Re: CRUCIAL MX500

Postby Roman_TS » 02.11.21, 16:27

CrazyDoctor wrote:Hello,
Does this SM2258H support already?


The list of supported drives you can find here:

https://blog.acelaboratory.com/pc-3000- ... dated.html

Every single manufacturer who is dealing with SM2258 controller is writing its own firmware for SSD. As the result, we should develop a new utility for every single SM2258 case. Right now we can work with Plextor S2C and ADATA SU800. Other models are not listed. Probably we will add them in the future but I don't have any estimated time for now.

At the same time, SM2258XT-based drives are fully supported without any limitations. We can work almost with all existing drives, no matter who is the manufacturer and what is the model name. SM2258XT drives are using very similar firmware which makes our Utilities to be Universal.
With best regards
ACELab Technical Support
ts.acelab.eu.com
blog.acelab.eu.com


FTWOTECHNOLOGY
Newbie
Posts: 9
Joined: 04.06.18
Reputation: 0 / (0)

Re: CRUCIAL MX500

Postby FTWOTECHNOLOGY » 13.01.24, 10:17

NOW pc3000 portable has support for crucial mx500 controller 2258H or we have to wait more?

User avatar
Roman_TS
Site Admin
Posts: 685
Joined: 09.02.11
Reputation: 25 / (252)

Re: CRUCIAL MX500

Postby Roman_TS » 13.01.24, 17:58

Sorry for the bad news, but your drive is not supported. Every single manufacturer who is dealing with SM2258H/G controller is writing its own firmware for SSD. As the result, we should develop a new utility for every single SM2258H/G case. Right now, we can work with ADATA SU800, Plextor S2C and Transcend 370S family. Other models are not listed. Probably we will add them in the future, but I don't have any estimated time for now.

At the same time, SM2258XT-based and SM2259XT drives are fully supported without any limitations. We can work almost with all existing drives, no matter who is the manufacturer and what is the model name. SM2258/59XT drives are using very similar firmware, which makes our Utilities to be Universal.

P.S. It's a SATA drive. List of supported SATA drives is the same for Portable III, UDMA and Express.
With best regards
ACELab Technical Support
ts.acelab.eu.com
blog.acelab.eu.com


Return to “M500 Series”

Who is online

Users browsing this forum: No registered users and 1 guest