SM2256K all sectors zeroed

[northwind]

Hi,

I got this Transcend SSD with SM2256K.

It stays in BSY.

After shorting and choosing Adata utility for SM2256K, drive IDs OK

id ok.JPG (108.29 KiB) Viewed 5934 times

But when I read sectors via utility, all sectors look the same, and garbled. Sector 0:

gar1.JPG (168.33 KiB) Viewed 5934 times

Sector 2048:

s2048.JPG (10.01 KiB) Viewed 5934 times

All sectors look the same.

When I create translator, I get this

Service area scanning
block: 0x0004........................... : ISP
block: 0x0005........................... : ISP
Completed

Blocks of translator is not found

and then,

Translator build
User blocks (Found)..................... : 0x00000000
Min version: 0xFFFFFFFF; Max version: 0x0000
Completed
****************************************
Completed
****************************************
Test completed

trans.JPG (8.79 KiB) Viewed 5934 times

Indeed, if I create a new task, all sectors read OK (all green), but they are all empty (zeroed).

zeroed.JPG (11.35 KiB) Viewed 5934 times

Any ideas?

[Roman_TS]

Transcend drives are not supported officially by PC-3000. Maybe you can send this drive to us for research.

SM2246 - have the same translator structure, LDR and other modules. But starting from SM2256 - all models might be very different. Even if both are based on the same controller like SM2256K (ADATA is supported, Transcend is not supported).

[northwind]

Alright, thanks for the input.

Gonna ask the client if they're willing to have their drive sent for research.