kingmax 240gb SM2258XT HYN04

[NSRGroup]

Hi guys ,
i have a ssl 240 kingmax with sm2258xt with problem
Command execution error; Write sector error (LBA: 21 930); HDD DMA Redynes timeout (10000)
i have kast uodate 7.8.23 pc3000 and 3.8.10 SSD utility


Selected family......................... : ADATA SU650 (SM2258XT)
Controller.............................. : SM2258XT

SSD status:
SSD is in ready state................... : Yes
Firmware mode........................... : ROM
SSD error code.......................... : 0x00 (No errors)
SSD is locked........................... : No
SSD is in Safe Mode..................... : Yes
Logical access is possible.............. : No
Physical access is possible............. : No

Chips id................................ : AD5C282A0190
Vendor.................................. : Hynix
Type.................................... : 3dv4-72L TLC 8k

Loader uploading
****************************************
MPISP code name......................... : U0330A0 HYNV4_00; T0710A(N)

U0330A0 HYNV4_00; T0710A(N)............. : Ok
Calling executable code................. : Ok

Seed table reading
Completed
Microcode reading (0)................... : Ok
Firmware version (Internal)............. : U0330A0 HYNV4_00
SSD parameters reading.................. : Ok

Reset SSD controller.................... : Ok
Config Package.......................... : Ok
U0330A0 HYNV4_00; P0812(D).............. : Ok
Calling executable code................. : Command execution error; Write sector error (LBA: 21 930); HDD DMA Redynes timeout (10000)

Ready state waiting..................... : Ok

Reset SSD controller.................... : Ok
Config Package.......................... : Ok
U0330A0 HYNV4_00; P0812(D).............. : Ok
Calling executable code................. : Command execution error; Write sector error (LBA: 21 930); HDD DMA Redynes timeout (10000)

SSD status:
SSD is in ready state................... : No
Firmware mode........................... : Unknown
SSD is locked........................... : Unknown
SSD is in Safe Mode..................... : Unknown
Logical access is possible.............. : No
Physical access is possible............. : No
Operation aborted
****************************************
Loader is not uploaded! Some of the functions are not available!
Utility initialization was terminate!
Drive power supply...................... : OFF

is there any solution for that ?

[italyassistance]

https://blog.acelab.eu.com/pc-3000-ssd- ... dated.html

[Roman_TS]

Don't forget the CHIP ID reading. All IDs should be on place. If something missed - there is a problem with physical correction.

Here is the instruction how to chose loader:

https://blog.acelab.eu.com/pc-3000-ssd- ... t-xt2.html