Page 1 of 1

144L (N38) QLC no correct loader

Posted: 22.11.23, 11:37
by gameboybin
So i have this Dahua SSD
Uses SM2259XT Chip
Which has Intel chip with this type 144L (N38) QLC

I tried almost every loader and havent found the correct fw for it yet
Attachments
IMG_20231122_174322.jpg
IMG_20231122_174322.jpg (866.09 KiB) Viewed 16355 times
IMG_20231122_174320.jpg
IMG_20231122_174320.jpg (586.77 KiB) Viewed 16355 times
IMG_20231122_174318.jpg
IMG_20231122_174318.jpg (630.26 KiB) Viewed 16355 times

Re: 144L (N38) QLC no correct loader

Posted: 22.11.23, 14:40
by Roman_TS
Hello.

I think that if you already tried all possible loaders but didn't get any positive result, then you have just two options:

1. Wait for a new update, where the error processing for SM2259XT will be improved;
2. Cancel this case. QLC memory have a poor quality, and chances on a good recovery from memory where the charge been leaked - are too small.

Re: 144L (N38) QLC no correct loader

Posted: 22.11.23, 16:51
by gameboybin
Roman_TS wrote:Source of the post Hello.

I think that if you already tried all possible loaders but didn't get any positive result, then you have just two options:

1. Wait for a new update, where the error processing for SM2259XT will be improved;
2. Cancel this case. QLC memory have a poor quality, and chances on a good recovery from memory where the charge been leaked - are too small.


Thanks for the response Roman