PC-3000 Forum

Hi,

I have San Disk SSD Plus (SM2246XT) that accepts loader and builds translator.

Shows that the it has certain amount of bad pages (thousands).

I set DE to ignore ECC errors.

Any sector that has no data (all zeroes) in it reads good (Green), any sector with data is ECC error.

I have tried freezing NANDs and it has no effect.

Any possible way to get around ECC errors on every sector with data?

I suspect that NANDs are too far gone?

Thank you for your time.

You can also try heating the NANDs and see if that makes a difference.

Heating the NAND chips with hot air up to +160C should help to reduce the errors.