Page 1 of 1

GIGABYTE SSD bad sector

Posted: 05.05.21, 03:24
by thientankt
ssd GigaByte with Phison PS3111 Controller and new firmware SBFMP1.3 . I Can translator OK but 99% sector is Black.
Image
Attachments
Untitled.png
Untitled.png (7.67 KiB) Viewed 9634 times

Re: GIGABYTE SSD bad sector

Posted: 05.05.21, 09:32
by Roman_TS
Hello. Most likely current loader does not fit correctly. Did you try others?

Re: GIGABYTE SSD bad sector

Posted: 06.05.21, 10:22
by thientankt
Roman_TS wrote:Source of the post Hello. Most likely current loader does not fit correctly. Did you try others?

I try all Loader but the same result. I receive 6 ssd Gigabyte and all themes same.

Re: GIGABYTE SSD bad sector

Posted: 06.05.21, 11:24
by Roman_TS
Then, current firmware is too new and not completely compatible with existing loaders. Future updates will brings more PS3111 loaders, need to wait.

Re: GIGABYTE SSD bad sector

Posted: 10.06.21, 10:39
by otako
thientankt wrote:Source of the post ssd GigaByte with Phison PS3111 Controller and new firmware SBFMP1.3 . I Can translator OK but 99% sector is Black.


Had any chance to try build loader with new PC-3000 SSD Ver. 2.10.2?

Re: GIGABYTE SSD bad sector

Posted: 12.06.21, 09:54
by thientankt
otako wrote:Source of the post
thientankt wrote:Source of the post ssd GigaByte with Phison PS3111 Controller and new firmware SBFMP1.3 . I Can translator OK but 99% sector is Black.


Had any chance to try build loader with new PC-3000 SSD Ver. 2.10.2?

New Update SSD Support new firmware phison 3111. You can try

Re: GIGABYTE SSD bad sector

Posted: 15.06.21, 10:31
by otako
thientankt wrote:New Update SSD Support new firmware phison 3111. You can try

Yup it worked for me. I had a goodram with firmware SBFMP1.3. On older loaders it would not work at all.

Code: Select all

Translator initialization
****************************************
   Creating translator
   ****************************************
      Read System Info........................ : Ok
      Invalid channels count value (0x00)
      Parameter "ChannelsCount"=0x01
      Invalid chips count value (0x00)
      Parameter "ChipsCount"=0x01
      Invalid blocks per chip value (0x0000)
      Parameter "BlocksPerChip"=0x0100
      Invalid pages per block value (0x0000)
      Parameter "PagesPerBlock"=0x0100
      Invalid page size value (0x0000)
      Parameter "PageSize"=0x4000


With the loader SBFMP1.4 it worked like charm, no errors while uploading a loader or creating translator.

Code: Select all

System Info:
Chips id................................ : 0x9BC348251000
Vendor.................................. : YMTC
Type.................................... : TLC 16k


Code: Select all

     Translator build
      Completed
   ****************************************
   Completed
****************************************
Test completed


Now I have access to data.
TS with acelab is worth every penny.

Re: GIGABYTE SSD bad sector

Posted: 15.06.21, 18:54
by Roman_TS
otako wrote:Source of the post With the loader SBFMP1.4 it worked like charm, no errors while uploading a loader or creating translator.


Great to hear that solution is working. Actually, the most troublesome thing was the new NAND manufacturer - YMTC. We have never seen it before. Drives with these NAND chips have a different location of SA modules, which makes existing loaders to be useless. Anyway, we added it in a recent update - 6.9.10. Glad that you tried it and got the data!

Re: GIGABYTE SSD bad sector

Posted: 16.07.21, 03:35
by sustek
I confirm, just tried it on the same SSD (Patriot Burst) and it works! Good job! :thumbup:

Re: GIGABYTE SSD bad sector

Posted: 20.07.21, 21:23
by dataclinicmx
Hi i tried this one SILICON POWER S55 (PS3111), and worked for me !!