Page 1 of 1

S3+ with controller AS2258BN

Posted: 03.01.20, 11:00
by Mekanik
Just received an SSD "S3+" with controller ASOLID AS2258-BN

Drive still busy.
Is a rebranded controller? ....like a PS3111 ?

It can reach safe mode shorting 2 points on left.

20200103_120710.jpg
20200103_120710.jpg (15.97 KiB) Viewed 8261 times

Re: S3+ with controller AS2258BN

Posted: 03.01.20, 18:51
by Roman_TS
Hello!

This CPU is the same as PS3111, but better to chose Utility for AS2258 CPU than for PS3111.

Re: S3+ with controller AS2258BN

Posted: 06.09.24, 01:24
by rickchbz
i had a case like that

the ssd model was TLC SATA III 240 GB, its controller was asolid AS2258BN

it was recognized for my pc3k only chosing SSD family Novation 3D model SATABURN SB firmware SBBM71.2, in the utility reconized 137 GB and in the extractor recognized 307 GB , it was cloned sucessifully 227,4 GB and data was recovered, i had to make before short circuit and Loader uploading.
Attachments
14.png
14.png (34.23 KiB) Viewed 4903 times
13.png
13.png (27.48 KiB) Viewed 4903 times
12.png
12.png (17.61 KiB) Viewed 4903 times
11.png
11.png (13.57 KiB) Viewed 4903 times