Drive still busy.
Is a rebranded controller? ....like a PS3111 ?
It can reach safe mode shorting 2 points on left.
- 20200103_120710.jpg (15.97 KiB) Viewed 3886 times
S3+ with controller AS2258BN
Moderators: Roman_TS, Filipp_TS, Sergey_TS
S3+ with controller AS2258BN
Just received an SSD "S3+" with controller ASOLID AS2258-BN
Drive still busy.
Is a rebranded controller? ....like a PS3111 ?
It can reach safe mode shorting 2 points on left.
Drive still busy.
Is a rebranded controller? ....like a PS3111 ?
It can reach safe mode shorting 2 points on left.
Re: S3+ with controller AS2258BN
Hello!
This CPU is the same as PS3111, but better to chose Utility for AS2258 CPU than for PS3111.
This CPU is the same as PS3111, but better to chose Utility for AS2258 CPU than for PS3111.
With best regards
ACELab Technical Support
ts.acelab.eu.com
blog.acelab.eu.com
ACELab Technical Support
ts.acelab.eu.com
blog.acelab.eu.com
Re: S3+ with controller AS2258BN
i had a case like that
the ssd model was TLC SATA III 240 GB, its controller was asolid AS2258BN
it was recognized for my pc3k only chosing SSD family Novation 3D model SATABURN SB firmware SBBM71.2, in the utility reconized 137 GB and in the extractor recognized 307 GB , it was cloned sucessifully 227,4 GB and data was recovered, i had to make before short circuit and Loader uploading.
the ssd model was TLC SATA III 240 GB, its controller was asolid AS2258BN
it was recognized for my pc3k only chosing SSD family Novation 3D model SATABURN SB firmware SBBM71.2, in the utility reconized 137 GB and in the extractor recognized 307 GB , it was cloned sucessifully 227,4 GB and data was recovered, i had to make before short circuit and Loader uploading.
- Attachments
-
- 14.png (34.23 KiB) Viewed 528 times
-
- 13.png (86.65 KiB) Viewed 528 times
-
- 12.png (17.61 KiB) Viewed 528 times
-
- 11.png (13.57 KiB) Viewed 528 times
Who is online
Users browsing this forum: No registered users and 1 guest