Dear Friends
I have a Fujitsu HD SAS model MBA3147RC where I can not access the data area to retrieve the information.
He presents the following symptoms;
1. Starts the spindle motor = OK
2. After beginning not calibrated, it is emitting sounds metallic.
3. Analysis of PCB has no signs of chips or components visibly damaged.
I need help to try to recover the data, if someone has had some experience and solution to apply.
I thank all
Alexandre
HD SAS FUJITSU - MBA3147RC
Moderator: Sergey_TS
- Alexandre Silveira
- Newbie
- Posts: 29
- Joined: 25.06.08
- Reputation: 1 / (6)
Re: HD SAS FUJITSU - MBA3147RC
That was solved by making a hot swap and reading with "Long reading" option.
With best regards
ACE Lab technical support
ts.acelab.eu.com
blog.acelab.eu.com
ACE Lab technical support
ts.acelab.eu.com
blog.acelab.eu.com
- Alexandre Silveira
- Newbie
- Posts: 29
- Joined: 25.06.08
- Reputation: 1 / (6)
Re: HD SAS FUJITSU - MBA3147RC
This case we have managed to solve here in our company. Hotswap procedures did not work, because the set of heads are damaged.
To retrieve the data we had to replace the head assembly using in our clean room.
To retrieve the data we had to replace the head assembly using in our clean room.
Who is online
Users browsing this forum: No registered users and 2 guests