Page 1 of 1

Hitachi IBM - NV-Ram adjustment

Posted: 05.04.10, 15:49
by ACE_Admin
Sometimes it is happened, the board on hitachi-ibm drive dies completely with all its chips incluting ROM and NV-Ram chips. In this case it helps to find board with compartible ROM version and find NV-Ram on a surface.

Here are the settings to find it on HTS541040G9AT00
Use the "7FE000d5" address from my picture for all hts5410g9

Dont forget to turn off autoreassign before reading the data.
Attachments
nv-ram.JPG
nv-ram.JPG (83.2 KiB) Viewed 24482 times

Re: Hitachi IBM - NV-Ram adjustment

Posted: 09.04.10, 11:32
by Winchester
What about HTC426040G9AT00? Is it also possible?

Re: Hitachi IBM - NV-Ram adjustment

Posted: 25.04.10, 16:35
by ZeBong
this is nice, i think you should post more like this one.

it will help all the users, and the support will became better.


Regards
Jose

Re: Hitachi IBM - NV-Ram adjustment

Posted: 18.08.10, 17:00
by Nova
How about if HTS541616J9SA00 NVRAM corrupted? Could the same methods be used? At which address?

Re: Hitachi IBM - NV-Ram adjustment

Posted: 24.11.23, 10:40
by gameboybin
What if the drive readies up but cannot ID. How can you find NVRAM on Surface???