HTS 543225L9A300, 5K320-250 Pls, help me

[norbertnad]

Hi everybody,

I am new in this forum.
I don´t know what i can do, maybe everyone have a idea...?

It is a Hitachi HTS 543225L9A300, 5K320-250

1. Question: how restore rom back to hitachi, on menu is only read rom my pc3000 Express is 6.7.18 version. I selected custom family hts5432sl9, read rom ok.
2. I don´t know what i can do, how rescue data , pls help me

Logs:

Loading data for correction of HDD family handling settings from section MEM_P
Loading data for correction of HDD family handling settings from section HTS5432L9


Selected family......................... : CUSTOM
Model by ID............................. : <ID IS NOT READ>

Techno mode key......................... : Ok
NV-RAM reading.......................... : Ok

Device error detected "ABR"
Loading modules table................................................. : Error
Error : .............................................................. : Device error detected "ABR"
Loading the table of "open" modules................................... : Error
Error : .............................................................. : Error executing loading "open" modules dir command
Module ZONE is not found!
Module is not loaded (RESF, Main module table)

[digitalsupport]

Think you need to tell a little more about the drive. Is it spinning any noises, what happened to the drive?
This is a learning case and not a client drive, right? Get a working drive same model and get use to how PC3K is working, and also would suggest some training.

[norbertnad]

The disc not allways mades after turn on - clicking sound (after stopped clicks hdd state is ok) even after replacement heads, pcb org, nvram is ok.

Source of the post e, right? Get a working drive same model and get use to how PC3K is working, and also would suggest some training.
https://digitalsupport.dk