HTS 543225L9A300, 5K320-250 Pls, help me

Moderators: Maxim_TS, Filipp_TS, Sergey_TS, Garry_TS


norbertnad
Newbie
Posts: 2
Joined: 25.05.19
Reputation: 0 / (0)

HTS 543225L9A300, 5K320-250 Pls, help me

Postby norbertnad » 21.08.20, 08:24

Hi everybody,

I am new in this forum.
I don´t know what i can do, maybe everyone have a idea...?

It is a Hitachi HTS 543225L9A300, 5K320-250

1. Question: how restore rom back to hitachi, on menu is only read rom my pc3000 Express is 6.7.18 version. I selected custom family hts5432sl9, read rom ok.
2. I don´t know what i can do, how rescue data :(, pls help me

Logs:

Loading data for correction of HDD family handling settings from section MEM_P
Loading data for correction of HDD family handling settings from section HTS5432L9


Selected family......................... : CUSTOM
Model by ID............................. : <ID IS NOT READ>

Techno mode key......................... : Ok
NV-RAM reading.......................... : Ok

Device error detected "ABR"
Loading modules table................................................. : Error
Error : .............................................................. : Device error detected "ABR"
Loading the table of "open" modules................................... : Error
Error : .............................................................. : Error executing loading "open" modules dir command
Module ZONE is not found!
Module is not loaded (RESF, Main module table)

User avatar
digitalsupport
User
Posts: 224
Joined: 30.12.11
Reputation: 6 / (62)

Re: HTS 543225L9A300, 5K320-250 Pls, help me

Postby digitalsupport » 23.08.20, 11:35

Think you need to tell a little more about the drive. Is it spinning any noises, what happened to the drive?
This is a learning case and not a client drive, right? Get a working drive same model and get use to how PC3K is working, and also would suggest some training.


norbertnad
Newbie
Posts: 2
Joined: 25.05.19
Reputation: 0 / (0)

Re: HTS 543225L9A300, 5K320-250 Pls, help me

Postby norbertnad » 29.10.20, 15:55

The disc not allways mades after turn on - clicking sound (after stopped clicks hdd state is ok) even after replacement heads, pcb org, nvram is ok.
digitalsupport wrote:Source of the post e, right? Get a working drive same model and get use to how PC3K is working, and also would suggest some training.
https://digitalsupport.dk


Return to “IBM/Hitachi/HGST (Arch M24)”

Who is online

Users browsing this forum: No registered users and 1 guest