HGST HTS725050A7E635 OPAL ( 0 MB )

[redlabs]

WARNING! SET FEATURES subcommand required to spin-up after power-up!



Selected family......................... : 7250A7
Model by ID............................. : HGST HTS725050A7E635 OPAL

Techno mode key......................... : Error
ROM reading...
Possible Tech Key is found. Checking...
Result.................................. : Ok

Error executing command: Reading SA [0x3F0000004, 0x4]
Device error detected "ABR"
Error reading module USAG(0): Error executing command: Reading SA [0x3F0000004, 0x1]
Device error detected "ABR"
Error executing command: Reading SA [0x3F0100004, 0x4]
Device error detected "ABR"
Error reading module USAG(1): Error executing command: Reading SA [0x3F0100004, 0x1]
Device error detected "ABR"
Loading modules table................................................. : Error
Error : .............................................................. : Module USAG: no copies read!
Loading the table of "open" modules................................... : Error
Error : .............................................................. : Error executing loading "open" modules dir command



Dear Frds

The above error is coming while accessing hdd ,No head noise in the hdd kindly advise me in this problem

[DataMedics]

Probably bad heads. If not that, then it's a corrupted modules table, which is even worse.

[d1d]

Probably bad heads. If not that, then it's a corrupted modules table, which is even worse.

how could i fix corrupted modules table ?

[DataMedics]

Typically you can't.