Autoreassign [ On/Off ] - While Cloning M8E Series HDD
Posted: 31.03.16, 08:41
by Amarbir[CDR-Labs]
Hello TS Team ,
Today i got a Case Where The Drive Came With Heads Stuck On Platter Issue .The Same Was Rectified In My Clean Room .Now The Current Situation is That Heads 0,1,2 From The Four Present 0,1,2,3 Are Cloning Fine .The Top Head 3 Is Having Reading Issues .Why Does This Happen Is My First question " Is It due To The Fact That Dust Settles While We Do The Procedure In The Cleanroom ? . I Always Blow Away Dust With a Manual Blower While i Am In The Procedure or About To Close The Case Top Lid .Am i Overdoing The dust Blowing ? . My Second Problem is That i Would Like To Ask My Staff
Question : How To Disable Autoreassign While Cloning These Samsung Drives ? ,If I am Cloning The Top Head Head No 3 I Get The Following In Terminal .
Ps : Log File is Attached
Attachments
- log.zip
- (3.94 KiB) Downloaded 676 times
Re: Autoreassign [ On/Off ] - While Cloning M8E Series HDD
Posted: 03.04.16, 11:05
by Amarbir[CDR-Labs]
Hello Team Ace ,
I Need a Answer to My Post is This Possible Or Not
Re: Autoreassign [ On/Off ] - While Cloning M8E Series HDD
Posted: 05.04.16, 12:13
by Garry_TS
Hi,
Yes, it could be due to dust. Please provide more details:
1) What kind of "manual blower" do you have? Can you provide some photos?
2) Is head 3 able to read some sectors or is it unable to read all?
3) Have you tried to reduce read retry count value in utility (e.g. set it from 0x66 to 0x02) ?
Re: Autoreassign [ On/Off ] - While Cloning M8E Series HDD
Posted: 05.04.16, 14:15
by Amarbir[CDR-Labs]
Pavel_TS wrote:Source of the post Hi,
Yes, it could be due to dust. Please provide more details:
1) What kind of "manual blower" do you have? Can you provide some photos?
2) Is head 3 able to read some sectors or is it unable to read all?
3) Have you tried to reduce read retry count value in utility (e.g. set it from 0x66 to 0x02) ?
Hi ,
Pavel I Have a Basic Type Manual Air Blower ,This is How It Looks Like ->http://www.lynx-india.com/index.php?productID=21646 [ BTW Lynx-india Is Also My Own Website ] .Yes Head 3 Was Able to Read Lots Of Sectors ,Can You Explain Me this " Have you tried to reduce read retry count value in utility (e.g. set it from 0x66 to 0x02) " .Specially The Hex Value you stated 0x66 and 0x02
Re: Autoreassign [ On/Off ] - While Cloning M8E Series HDD
Posted: 06.04.16, 18:12
by Amarbir[CDR-Labs]
Hi Pavel,
Thanks For This Many Many People Do Not Know This I Had Posted This On Jareds forums But There Too everyone Was Blank
Re: Autoreassign [ On/Off ] - While Cloning M8E Series HDD
Posted: 06.04.16, 20:34
by DataMedics
Hey, hey, hey. I wouldn't say we're blank...maybe just didn't get around to responding. Or possibly we didn't understand what you were asking.
Re: Autoreassign [ On/Off ] - While Cloning M8E Series HDD
Posted: 07.04.16, 14:00
by lcoughey
DataMedics wrote:Source of the post Hey, hey, hey. I wouldn't say we're blank...maybe just didn't get around to responding. Or possibly we didn't understand what you were asking.
I don't recall even seeing the post on that forum.
Re: Autoreassign [ On/Off ] - While Cloning M8E Series HDD
Posted: 07.04.16, 14:28
by LarrySabo
A search of Jared's forum for posts containing the word "retry" yields just 2 threads, neither of which involved Amarbir. Perhaps he is thinking of some other forum.
Re: Autoreassign [ On/Off ] - While Cloning M8E Series HDD
Posted: 07.04.16, 14:48
by lcoughey
LarrySabo wrote:Source of the post A search of Jared's forum for posts containing the word "retry" yields just 2 threads, neither of which involved Amarbir. Perhaps he is thinking of some other forum.
When I went in this morning, didn't need to search. It pops up under new threads -
https://www.data-medics.com/forum/autor ... t1289.html
