HM100UX/VP4 1TB USB

[Marek]

Hello

I have HDD 2,5" Samsung 1TB HM100UX/VP4

The USB connector is very damage...

Any ideas how to solder SATA t this PCB? Or adapt SATA PCB??

regards

[Amarbir[CDR-Labs]]

Source of the post Hello

I have HDD 2,5" Samsung 1TB HM100UX/VP4

The USB connector is very damage...

Any ideas how to solder SATA t this PCB? Or adapt SATA PCB??

regards

Yes ,
Can You Post a Clear Image of Both sides Of PCB Please ,You Have PC 3000 ? ,Is your idea to repair or only data recovery

[Marek]

Here comes







I want only data recovery

PC3000? Yes

[Filipp_TS]

Hello Marek,

The first image is blured.
So please take a look this article:
http://blog.acelaboratory.com/soldering ... b-pcb.html

[Amarbir[CDR-Labs]]

Source of the post Hello Marek,

The first image is blured.
So please take a look this article:
http://blog.acelaboratory.com/soldering ... b-pcb.html

Filipp ,
I Agree If someone understands and sees a few pcb he can find out the signals from main mcu to usb chip and tap them ,His images were not clear at all

[Marek]

What is not clear at this image? USB port is Gone...

[Marek]

I know how find the signal of USB and SATA brigde...

I try that that You see that capacitors is missing... But Drive is start - motor are start but nothing else

[Marek]

That im looking another way - maybe SATA PCB to adapt to drive...

This is my first HM100UX/VP4

[Amarbir[CDR-Labs]]

Source of the post That im looking another way - maybe SATA PCB to adapt to drive...

This is my first HM100UX/VP4

Sir ,
Take Another PCB And Try Out By Swapping Rom To That ,Might Be All of this has lead to some multilayer short or signal failure