WD600BB-00DKA0 - ROM damaged

[jojo2012]

Hi there,
I’m handled this case that comes from another lab.

The original PCB (2060-001159-006) was dead, and I have the donor PCB. Unfortunately the original flash ROM has been damaged, or rather a pin is detached.

There is the possibility of restoring it or rebuilding it from the SA like with the Marvel?....or is this a hopeless case?

Thanks guys for any hint or help

[digitalsupport]

jojo2012 send me a close up of the area where the pin is missing.
Have good experiences with this.

[Amarbir[CDR-Labs]]

Hi,
might be you can try programming few roms of same drive family in your donor pcb ,These drives can work like this imho

[jojo2012]

Source of the post jojo2012 send me a close up of the area where the pin is missing.
Have good experiences with this.

Thanks for the help DigitalSupport. I don’t have a close up of damaged area, I want to do it with a digital microscope. I wanted to try to write a few ROMs of the same drive family as suggested by Amarbir and another guy from another support. These drives do not have adaptive in ROM.

[jojo2012]

Well, case solved.
Wrote ROM in kernel mode from a drive of the same model in the database and it worked like a charm.