SpyGlass2 Ultra 2.5 FW Reqest

[DRCSL]

Hello,

Please check attachment picture.

Who can give me a firmware module backup suitable for this? Who can help me with this?


Thanks,
Daminda.

------------

Family:................................. : SpyGlass2 Ultra 2.5"
Techno mode key......................... : Ok

HDD Status sector....................... : Ok

RAM:
System controller (SoC)................. : 88i1054A1 0x(5471)
HDD Info reading........................ : Ok
Heads number............................ : 10
Cyl Count............................... : 384

ROM:
Read ROM................................ : Ok
ROM Data size........................... : 512 Kb
Flash ROM dir reading................... : Ok
Flash ROM dir reading (Ext)............. : Ok (Active)
Modules directory address............... : 801 050
SA regions address...................... : by default
Module 02 access........................ : Granted

SA SPT.................................. : 0

ROM Modules:
ROM version............................. : 00.0AA
Module 4F F/W version................... : 0000000A
Overlay F/W version..................... : 00.0AA
Servo F/W version....................... : 03.7B

Heads configuration..................... : by map
Heads number............................ : 10
Heads number in use..................... : 10
Switched off heads...................... : No
Heads map............................... : 0,1,2,3,4,5,6,7,8,9

Relocations............................. : 0 (0)
Read ROM DCM............................ : Ok

[d_d_recovery]

HDDSurgery firmware database has about a million of them (ish).

[igen]

Hi DRCSL,

I uploaded it to hddguru
Link: https://files.hddguru.com/download/PC-3 ... 19UZVT.ZIP

WD40NDZW-11A8JS0 - 01.01A01
ROM version: 00.0AA
ROM F/W version: 0000000A
Overlay: 00.0BA
Servo: 03.7B

You're welcome...

P.S.
I also have a problem with this disk, maybe someone can help?
Description: https://forum.acelab.eu.com/viewtopic.p ... 364#p40364

Thanks