WD40EZAZ-19SF3B0 loading 190 error using 7.2.15

Moderator: Maxim_TS


huangmiaofang
Newbie
Posts: 23
Joined: 18.07.15
Reputation: 1 / (10)

WD40EZAZ-19SF3B0 loading 190 error using 7.2.15

Postby huangmiaofang » 25.12.22, 07:29

MODEL:WD40EZAZ-19SF3B0
Family: Venice
PCB:810011

This is a good hard disk. I used the PC3000-UDMAE - 7.1.10 version to load and parse the 190 module, and everything was OK. However, if I used the latest version of 7.2.15, the following errors occurred during loading. The attachment contains the 190 module and logs.

thank you

7.1.10.jpg
7.1.10.jpg (8.83 KiB) Viewed 3640 times

7.2.15-1.jpg
7.2.15-1.jpg (5.63 KiB) Viewed 3638 times

7.2.15-2.jpg
7.2.15-2.jpg (7.77 KiB) Viewed 3638 times
Attachments
190.part004.rar
(662.44 KiB) Downloaded 157 times
190.part003.rar
(2 MiB) Downloaded 144 times
190.part002.rar
(2 MiB) Downloaded 135 times
190.part001.rar
(2 MiB) Downloaded 141 times
Log.rar
(1.08 MiB) Downloaded 128 times


ANURAG TIWARI
Newbie
Posts: 2
Joined: 01.01.23
Reputation: 0 / (1)

Re: WD40EZAZ-19SF3B0 loading 190 error using 7.2.15

Postby ANURAG TIWARI » 19.03.23, 16:46

Yes I face same problem this version is bug


huangmiaofang
Newbie
Posts: 23
Joined: 18.07.15
Reputation: 1 / (10)

Re: WD40EZAZ-19SF3B0 loading 190 error using 7.2.15

Postby huangmiaofang » 06.04.23, 10:20

ANURAG TIWARI wrote:Source of the post Yes I face same problem this version is bug

This bug has been submitted for 4 months and has not been fixed. It will probably need to wait for version 7.3


Return to “WD Marvell”

Who is online

Users browsing this forum: No registered users and 2 guests