WD10SDRW-11A0XS1 please help me solve

[OHMYDATA]

model : WD10SDRW - 11A0XS1

HDD ID is not displayed
This is the result of accessing the utility in kernel mode and Palmer family.

-------------------------------------------------------------------------------------------------------------------------------------
Techno mode key
Techno mode key......................... : Ok

RAM:
HDD Info reading........................ : HDDs RAM reading error Device Error Detected: "SED DRIVE LOCKED"
ROM:
Read ROM................................ : HDDs ROM reading error Device Error Detected: "SED DRIVE LOCKED"

Relocations............................. : 0 (0)
-------------------------------------------------------------------------------------------------------------------------------------

test -> work with ROM -> SA regions editor

module id 0B reading error Device Error Detected: "SED DRIVE LOCKED"

A message like this is output.

I would like to know how to solve it. Excuse me, but can anyone help?

[SGdata]

There's an article about SED on ACELAB's blog.

[msurgeon]

You will need to use an unlocked PCB with patient ROM transferred in order to tackle this issue. You can also rebuild patient ROM from SA with donor ROM on unlocked board. The technique for doing this is described in a blog post.

[OHMYDATA]

Can I get a loader or module for this model? Progress is not possible due to a module 02 error.

[DataMedics]

Source of the post Can I get a loader or module for this model?

Probably, but you'd need to first disclose details like the consolidated ROM version so we have a chance of sharing a compatible one.