Page 1 of 1
Possible to do SHS on Giant Family Drives
Posted: 23.07.20, 20:50
by DataMedics
Does anyone know if it's possible to do SHS on a Giant family WD drive? I have all the modules read by composite, but there's too much damage to both copies to fix the drive's own SA. I just can't get ID no matter what I do to the donor, even with all tracks written and modules replaced with the composite ones.
Re: Possible to do SHS on Giant Family Drives
Posted: 24.07.20, 21:49
by Doomer
per my knowledge it is possible to do a hotswap on any WD ROYL drive
Re: Possible to do SHS on Giant Family Drives
Posted: 24.07.20, 22:02
by d_d_recovery
I had a similar situation a while ago, and I seem to remember Ace telling me it is not possible to do a hot swap on a WD produced after the Saddle G6 family. However that is just from memory I could be wrong.
Re: Possible to do SHS on Giant Family Drives
Posted: 25.07.20, 19:47
by Doomer
d_d_recovery wrote:Source of the post I had a similar situation a while ago, and I seem to remember Ace telling me it is not possible to do a hot swap on a WD produced after the Saddle G6 family. However that is just from memory I could be wrong.
Weird
I was able to hotswap even Spyglass-es
Re: Possible to do SHS on Giant Family Drives
Posted: 25.07.20, 20:42
by d_d_recovery
Well I hope that method propagates to Ace Labs soon. Would be great to use it.