PC-3000 Forum

I have Hard disk wd20nmvw-11av3s2 and I like to Transfer Rom from usb pcb to Donor pcb


I believe this drive has slow response issue so planing to change from usb pcb to sata

so i am looking for any documentation can help me to transfer the rom from this 2060-771961-001 rev A TO 2060-771960-000-REV A

This 2060-771961-001 has 12 pins so i like to know how we can setup com connection

how i can transfer rom information from one pcb to other pcb

Thanks

How to make a Com connection is right here https://forum.acelab.eu.com/viewtop ... 155&t=7397
How to transfer via Boot ROM mode you will find here: https://blog.acelab.eu.com/boot-rom ... rives.html

Thank you Digital but the problem is in this model

there are two rows of 6 pins

not sure where the com connection should be connected which adapter is good to use

You can use the WD 2.5 adapter. (see photo for connection)

Thank you Blizzard

Hello I have question on this topic... wd20nmvw-11av3s2, PCB 2060-771961-001 REV A. I found two SATA boards 2060-771961-001 REV A, REV P1, P2. Which PCB is compatible?

radovanhlavacek wrote:Source of the post Hello I have question on this topic... wd20nmvw-11av3s2, PCB 2060-771961-001 REV A. I found two SATA boards 2060-771961-001 REV A, REV P1, P2. Which PCB is compatible?

Hi from my experience the most compatible would be 2060-771961-001 REV A. All screws line up as well unlike the others I have tried.