WD20NMVM-11EDZS2

lka124 · Postby **lka124** » 03.05.17, 12:45

I need help with WD20NMVM-11EDZS2.
I replaced USB-3 PCB to Sata PCB with Rom desolder.
If i start utility "HDD is locked" both, open hdd or remove password it does not work. Drive is locked by WD Software and i know the password.
How can i access the data?

lka124 · Postby **lka124** » 04.05.17, 08:27

Have i do unsolder U14 too?

lka124 · Postby **lka124** » 04.05.17, 12:36

i have solved the problem:-)
i follow the blog entry http://blog.acelab.eu.com/pc-3000-f ... drive.html step by step.
first mistake was , i forgot the decryption check box at DED-task.

Amarbir[CDR-Labs] · Postby **Amarbir[CDR-Labs]** » 07.05.17, 11:51

lka124 wrote:Source of the post i have solved the problem:-)
i follow the blog entry http://blog.acelab.eu.com/pc-3000-f ... drive.html step by step.
first mistake was , i forgot the decryption check box at DED-task.

Hi,
Its called SED " Self Encrypting Drive "

lka124 · Postby **lka124** » 08.05.17, 06:43

yes i know, but client have also uses WD Software with another password

PC-3000 Forum