WD10JMVW-11AJGS4 USB HDD Recovery

[d1d]

Hi @all,

i have a WD USB 2,5" HDD here.
The HDD was by an other Datarecovery Lab.
They open the HDD. So i have also a look into the HDD but the Heads looks good and there are no scrates on the surface.

So i have bought a comp. SATA PCB and change the PCB also i have solderd the ROM from the USB PC to the SATA PCB.

I have make a backup from the ROM Files but i can´t get access on the Data.

What i´v made wrong?

I knwo i must make a Recovery training but i think i have done what Luke Grudnoff the old Owner of Day1 Data told me.

So anyone an idea?

Thanks a lot and best wishes

Luigi

[SGdata]

Does the drive get full ID? Did you check modules?

[d1d]

Hi SGdata,

so thats what i get....

ROM Modules:
ROM version............................. : 16.94H
ROM F/W version......................... : 00160094
Overlay F/W version..................... : 16.94H
Servo F/W version....................... : NA.41

Heads configuration..................... : by map
Heads number............................ : 4
Heads number in use..................... : 4
Switched off heads...................... : No
Heads map............................... : 0,1,2,3


Read ROM
Into file............................... : <HDD Profile>\Data\ROM\ROM_16-94H_16-94H_NA-41.bin
ROM Data size........................... : 256 Kb
Ok

Read ROM modules
Into file............................... : <HDD Profile>\Data\ROM
Module : 0A............................. : Ok
Module : 0B............................. : Ok
Module : 20B............................ : Ok
Module : 30............................. : Module ID 30 reading error Data request error Device Error Detected: "FM ERR FILE ID"
Module : 47............................. : Ok
Module : 0D............................. : Ok
Module : 4F............................. : Ok

Module 0x90 read error.................. : Module ID 90 reading error Device Error Detected: "VSC ERR KEY SECTOR MUST PRECEED DATA XFER REQUEST"
Module sector read error................ : No SA copy avalabled
Module sector read (Head 0)............. : Physical read error C/H/S: -1/0/1 Device Error Detected: "VSC ERR KEY SECTOR MUST PRECEED DATA XFER REQUEST"
Module sector read (Head 1)............. : Physical read error C/H/S: -1/1/1 Device Error Detected: "VSC ERR KEY SECTOR MUST PRECEED DATA XFER REQUEST"

But it dosen´t get the ID.

Thanks a lot and best wishes

Luigi

[Maxim_TS]

d1d, Block SA access in ROM, restart the drive, and load donor loader to the patient RAM.
http://files.hddguru.com/download/PC-30 ... 68T1JN.rar
Then go to Normal mode and check if Service Area modules are readable.

[d1d]

Hi Maxim_TS,

hope you are fine!

Thanks for your replay, but it dosen´t work, same Problem....

RAM:
HDD Info reading........................ : Ok
Heads number............................ : 4
Cyl Count............................... : 256

ROM:
Read ROM................................ : Ok
ROM Data size........................... : 256 Kb
Flash ROM dir reading................... : Ok (Active)
Flash ROM dir reading (Ext)............. : Ok
Modules directory address............... : 16 180
SA regions address...................... : shifted
Module 02 access........................ : Granted
SA Translator loading................... : Module ID 30 reading error Data request error Device Error Detected: "FM ERR FILE ID"

ROM Modules:
ROM version............................. : 16.94H
ROM F/W version......................... : 00160094
Overlay F/W version..................... : 16.95H
Servo F/W version....................... : NA.41

Heads configuration..................... : by map
Heads number............................ : 4
Heads number in use..................... : 4
Switched off heads...................... : No
Heads map............................... : 0,1,2,3


HDD SA unblocking....................... : Ok
Firmware restart........................ : Ok

Module 0x90 read error.................. : Module ID 90 reading error Device Error Detected: "VSC ERR KEY SECTOR MUST PRECEED DATA XFER REQUEST"
Module sector read error................ : No SA copy avalabled
Module sector read (Head 0)............. : Physical read error C/H/S: -1/0/1 Device Error Detected: "VSC ERR KEY SECTOR MUST PRECEED DATA XFER REQUEST"
Module sector read (Head 1)............. : Physical read error C/H/S: -1/1/1 Device Error Detected: "VSC ERR KEY SECTOR MUST PRECEED DATA XFER REQUEST"

Best wishes

Luigi

[Maxim_TS]

Luigi, save ROM and ROM modules to the backup folder. Are all ROM modules good in log after the saving?

[d1d]

So i can save the Rom and all Moduls whitout the Modul 30 Translator....

The Moduls and the Rom locks good in Hex...

As Example Modul 0D in Attachments.

Best wishes Luigi

[Maxim_TS]

Looks like ROM module 30 is damaged. Try to write it from the same ROM FW version donor backup.

[d1d]

Hi Maxim_TS,

it dosen´t works....
So maybe Heads weak?

Best wishes

Luigi

[Maxim_TS]

Source of the post So maybe Heads weak?

hard to say, need to check remotely. Please contact us at https://ts.acelaboratory.com/