PC-3000 Forum

Boot 0x80MMC000Y0001
SpinUp
TCC:001E

Trans
Rst 0x80MMC000Y0001
(P) SATA Reset

MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
No HOST FIS-ReadyStatusFlags 0002A1A1
PrgF
ServoDiscSlip Time = 0001178F

stays busy

any help thanks

can you access terminal ?

Yes Terminal is accessible

It looks like 1D0 or 71 system files.

thank you guys for the response


trying to unlock I get "error initializing boot code mode"

Is there any help with the PC3000 with this drive?

have u tried different baud rates to unlock ? e.g 38000 ?

Sorry was away

thanks Guide forgot to lower the baud rate

i am in

you are welcome...