PC-3000 Forum

Hi,
I have this drive
Model : ST2000LM007-1R8174 after unlock, it is able to read the HDD ID.
BSY whenever i click any command.
It wont read any sector.can't backup modules.need help recovering files.

forgot to upload the terminal log.


Send Status: COMRESET seen
CSpd= 3Gbps
ASCII Diag mode

F3 T>
ASCII Diag mode

F3 T>/7

F3 7>m100

Diagnostic Port Locked

F3 7>
Diagnostic Port Locked

diagnostic port is locked when i try to perform this command.

How to bypass locked terminal and deal with Rosewood drives you can read in these articles:
http://blog.acelab.eu.com/pc-3000-f ... rives.html
http://blog.acelab.eu.com/pc-3000-f ... ackup.html

Also, welcome to Tech. support service:
ts.acelab.eu.com

baldric wrote:Source of the post Hi,
I have this drive
Model : ST2000LM007-1R8174 after unlock, it is able to read the HDD ID.
BSY whenever i click any command.
It wont read any sector.can't backup modules.need help recovering files.

Well,
Unlock Terminal first then take backup of SA ,Do not try any stunts like you do in F3 series Seagates .

Amarbir[CDR-Labs] wrote:Source of the post

baldric wrote:Source of the post Hi,
I have this drive
Model : ST2000LM007-1R8174 after unlock, it is able to read the HDD ID.
BSY whenever i click any command.
It wont read any sector.can't backup modules.need help recovering files.

Well,
Unlock Terminal first then take backup of SA ,Do not try any stunts like you do in F3 series Seagates .

i already follow the steps in
http://blog.acelab.eu.com/pc-3000-f ... rives.html
to unlock the terminal.

i think there's head problem with the drive, i perform the same unlock procedure to another ST2000LM007 it can be unlock. but it's facing translator issue(maybe).
can you please help me on that case?
viewtopic.php?f=154&t=9613

Hello Baldric,

Could you read 348 system file on this drive?