PC-3000 Forum

Hello.
I've patient ST3500418AS. Hdd starts and get at the DRD and DSC status for a fraction of a second. Next get BSY status for a few seconds and over and over again.
I can read single sector while hdd has DRD and DSC status.

Log from terminal:

Rst 0x10M
(P) SATA Reset
PASS
RW: Error processing Performance Parameter File: 203C
Send Status: COMRESET seen
Rst 0x10M
(P) SATA Reset
PASS
RW: Error processing Performance Parameter File: 203C
Send Status: COMRESET seen
Rst 0x10M
...

Hello,

Try to uncheck background processes in Edit HDD ID.

It seems that this solution has helped.
Now the hdd restarts every 1 to several minutes but it is enough to copy the sectors.
The copy speed is about 2 MB/s but well that goes.
Thank you veru much.

After uncheck all try to change in Utility status System file reading method to ATA direct and all data read in max speed. That helped for me.