Well, I noticed that the drive reported capacity of 0 GB, and tried the "
Solution for the "Translation violation (0 GB)" problem" which actually failed. Then after some reading I decided to try the "
Solution for the HDD Lock (LED: 000000CC) problem" since the HDD failed to become ready.
The hard drive now reports the correct capacity, and the "
PIO Register access timeout (1)" message has gone. So it seems to have fixed something.
There are however still some issues, example when trying to read S.M.A.R.T info, it reports "Error reading S.M.A.R.T. (Attribs) HDD Redynes timeout (100000)"
(a small typo in the err.msg btw)Regarding the status registers, DRD and DSC is green, no stuck BSY or any red lights.
The log is here:
Code: Select all
Selected family......................... : 58, Grenada
Model by ID............................. : <HDD ID NOT READ>
Loading default settings!
Use the options dialog to review and save utility settings.
Then press OK!
Family default settings loading!
Tech Key...
Requesting FW Pkg ver ........ GPG17C.CCD2.CB0487.CC26
Detecting Phys Sct Size...
Result.................................. : 4096
Detecting Max Head number...
Phys. heads............................. : 4
Obtaining Saved Mode Pages File information...
Reading Saved Mode Pages...
Parsing Saved Mode Pages...
SMP Dbl: 0x3C001000 - 0x0001FFFF (0x0000000F)
LBA alignment........................... : 0
Obtaining Registry File information...
Reading Registry File...
Parsing Registry File...
Media Cache
===========
MC : enabled
MC Size : 0x43DBB0
MCMT Ver : MCMTV05
Collecting Sys Files information...
ID Len
===============
0 36 Reserved Defect Table (SA defect table)
1 2 Drive Information File (DIF)
2 16 Performance Parameter File (PPF)
3 7782 Primary Defect File (P-List))
5 4 Manufacturing Information File (MIF)
8 4800
B 1000
C 122880 Serial Port Test Results File (Self Scan Log)
D 160
E 432 Data Integrity Check (DIC), HEAD 0
F 223 DIC Dummy File
13 8 Disc Registry File (settings, security, etc)
15 100 BGMS File (Directed Offline Scan)
16 2
17 40
19 24 Log File
1A 33 Log File
1B 1 Log File
1C 9
1D 128 Physical Overlay File 0
1E 128 Physical Overlay File 1
22 80 Drive Self Test (DST), Head 0
23 80 Drive Self Test (DST), Head 1
24 80 Drive Self Test (DST), Head 2
25 80 Drive Self Test (DST), Head 3
2A 9 Saved Mode Pages (HDD settings)
2B 10118 R/W Operating Parameters (translator, etc)
2C 432 Data Integrity Check (DIC), HEAD 1
2D 432 Data Integrity Check (DIC), HEAD 2
2E 432 Data Integrity Check (DIC), HEAD 3
33 4576
34 640 Packed CONGEN XML definition
39 8192
3A 4
3D 3072
3E 3072
3F 4576
40 7
41 2180
42 4096
43 10241
44 1357032
45 226172
46 226172
47 226172
48 226172
49 226172
4A 226172
4B 8192
4F 14336
Collecting Sys File Infos completed
Collecting DT Infos...
ROM:
ID MemOffs Len
===========================
0 40030200 40944 Read Adaptive Parameters File (RAP)
1 40030000 512 Controller Adaptive Parameters File (CAP)
4 1D400 7168 Servo Adaptive Parameter File (SAP)
40002000 13288
total 20456
5 6C000 81920 Servo Firmware Table
A 25EA94 1024 Seek Profile
13 401291C0 1440 Dependent Zone Table for User Area
14 40129760 120 Dependent Zone Table for System Area
15 0 524288 Flash ROM
1D 40030220 424 VBAR Configuration File
1E 400305B8 4016 Zone Format Parameters File
26 40126CF0 9424
27 40126AF8 504
RAM:
ID MemOffs Len
===========================
0 40030200 40944 Read Adaptive Parameters File (RAP)
1 40030000 512 Controller Adaptive Parameters File (CAP)
2 400303C8 496 Zone Table
4 1D400 7168 Servo Adaptive Parameter File (SAP)
40002000 13288
total 20456
5 6C000 81920 Servo Firmware Table
6 1915C40 81964 Servo Flaw Table
A 25EA94 1024 Seek Profile
13 401291C0 1440 Dependent Zone Table for User Area
14 40129760 120 Dependent Zone Table for System Area
15 0 524288 Flash ROM
16 40030200 32 Drive Configuration Table
17 400319A0 2016 Temperature Control Configuration
1D 40030220 424 VBAR Configuration File
1E 400305B8 4016 Zone Format Parameters File
1F 4032C8E8 4500 RW working user preamp table
20 4032DA80 150 RW working system preamp table
26 40126CF0 9424
27 40126AF8 504
Collecting DT Infos completed
Reading autotuning buffer............... Ok
Searching module table in RAM... ....... Ok
Searching volume 3 file table in RAM.... Ok
Searching volume 0 file table in RAM.... Ok
Searching SMP RAM FID in RAM............ Ok
Searching Non Resident G-List FID in RAM Ok
Searching CFW OVL FID in RAM............ Ok
Searching DT table(RAM, WR) in RAM...... Ok
Searching DT table(RAM, RD) in RAM...... Ok
System Files I/O method detection... ATA(direct)Thanks for helping! It's a long learning process
-Espen