Page 1 of 2
ST1000LM035-1RK172 Port Lock and Sector reading Problem
Posted: 22.02.17, 07:44
by bikram
Hi,
I have ST1000LM035-1RK172 (Mobile HDD) Hard disk showing port lock in this hard disk Sector reading problem. Please help if any solution how to unlock the terminal lock .we have 5 same hard disk for data recovery .
Boot 0x80M
QB
Rst 0x80MSrv DETCR init 0x0000
(P) SATA Reset
RAW OFF
PASS
EDAC Value = 00000000FFFFF844
EDAC Value = 00000000FFFFF844
EDAC Value = 00000000FFFFF844
EDAC Value = 00000000FFFFF844
EDAC Value = 00000000FFFFF844
EDAC Value = 00000000FFFFF844
EDAC Value = 00000000FFFFF844
EDAC Value = 00000000FFFFF844
(DOS Table) Worst Count: 00000000 At SU: FFFFFFFF NT: 00000000 OT: 00000000
Intel 6G->3G
Send Status: COMRESET seen
CSpd= 3Gbps
DSC
ASCII Diag mode
F3 T>
ASCII Diag mode
F3 T>
ASCII Diag mode
F3 T>
ASCII Diag mode
F3 T>m0,2,2,,,,,22
Diagnostic Port Locked
F3 T>
Thanks & regard
Bikram Singh
Re: ST1000LM035-1RK172 Port Lock and Sector reading Problem
Posted: 27.02.17, 11:25
by Nick_TS
Hi,
Drive has signed FW.
Developers are working on this issue, but solution is not ready now.
Re: ST1000LM035-1RK172 Port Lock and Sector reading Problem
Posted: 12.03.17, 17:53
by Amarbir[CDR-Labs]
Dmitriy_TS wrote:Source of the post Hi,
Drive has signed FW.
Developers are working on this issue, but solution is not ready now.
Hi,
i have one thats not clicking can i have some solution at least
Re: ST1000LM035-1RK172 Port Lock and Sector reading Problem
Posted: 27.03.17, 17:27
by Nick_TS
Dear Amarbir,
Right now developers are working with these drive and I hope you will have solution in near future.
Re: ST1000LM035-1RK172 Port Lock and Sector reading Problem
Posted: 27.03.17, 17:28
by Nick_TS
Amarbir[CDR-Labs] wrote:Source of the post i have one thats not clicking can i have some solution at least
Unfortunately working drive can't help us in research
Re: ST1000LM035-1RK172 Port Lock and Sector reading Problem
Posted: 02.04.17, 09:14
by Amarbir[CDR-Labs]
Dimitry ,
Can You Explain the difference in Signed Firmware And Unsigned Firmware In Seagate
Re: ST1000LM035-1RK172 Port Lock and Sector reading Problem
Posted: 19.04.17, 13:40
by Filipp_TS
The difference is that signed ROM can't be read as is and need to send another commands of reading it.
We haven't them for now.
Re: ST1000LM035-1RK172 Port Lock and Sector reading Problem
Posted: 30.05.17, 06:22
by Hemendra
Is latest release version 6.3.8 has solution for this type of case?
Re: ST1000LM035-1RK172 Port Lock and Sector reading Problem
Posted: 30.05.17, 19:23
by Maxim_TS
Hemendra, there are no unlock solution for LM035 drives in v6.3. Developers still working on it.
Re: ST1000LM035-1RK172 Port Lock and Sector reading Problem
Posted: 10.07.17, 19:10
by avalanche
Hello Acelabs team,
Is there any idea when an update to support locked Diagnostic Ports on Rosewood family will be made available?
Thanks,
J
Re: ST1000LM035-1RK172 Port Lock and Sector reading Problem
Posted: 19.07.17, 17:47
by pcimage
avalanche wrote:Hello Acelabs team,
Is there any idea when an update to support locked Diagnostic Ports on Rosewood family will be made available?
Thanks,
J
I'd like to know this too please!
Sean
Re: ST1000LM035-1RK172 Port Lock and Sector reading Problem
Posted: 19.07.17, 18:57
by Filipp_TS
Hi all!
Keep follow news at our site.
We will pleasantly surprise you asap.
Re: ST1000LM035-1RK172 Port Lock and Sector reading Problem
Posted: 20.07.17, 11:42
by pcimage
Great!!
Re: ST1000LM035-1RK172 Port Lock and Sector reading Problem
Posted: 20.07.17, 18:12
by Amarbir[CDR-Labs]
Filipp_TS wrote:Source of the post Hi all!
Keep follow news at our site.
We will pleasantly surprise you asap.
Filipp ,
This is great news the day its released i am updating my tool
Re: ST1000LM035-1RK172 Port Lock and Sector reading Problem
Posted: 21.07.17, 13:36
by bikram
Hi Fillipp,
Any Solution please tell me any good news about this hard disk.