PC-3000 Forum

ST320LT009
Part# 9WC142-031

Drive spins up fine stays spinning and comes ready but wont auto detect family, no ID.
It seems to be Julius1.

In the terminal output I get the following that just keeps repeating:

Rst 0x10M
(P) SATA Reset

Seg Read Error at LBA= 00640B40
Seg Read Error at LBA= 00640FA0
Seg Read Error at LBA= 00641400
Seg Read Error at LBA= 00641860
Seg Read Error at LBA= 00641CC0

Terminal is locked with the following error: (1Ah)-TCG Serial Port Disabled

Can the PC-3000 function with this model? I'm not sure how to proceed.

Any update on this family of drives?

Still waiting for the answer! Anyone know what family this is and if it's supported by the PC3K?

Bump

Hello,

It's Julius1 family with locked terminal prompt. Right now, our developers are working on this issue.

I think it may be possible to access this device via a non-SED PCB of Julius1 family after import of RAP CAP SAP IAP parameters from patient ROM to donor ROM - but in this state SA should be readable, however data will be crypted without original PCB and ROM attached

Dmitriy_TS,
Any update on this?