PC-3000 Forum

Posted: **26.12.21, 15:26**

HDD family detecting...
 
Tech Key...
Error executing command  "En Tech" (ABR)
Family ID: 00
Unlocking Diag Mode (terminal)...
Error unlocking Diag Mode: Terminal : reply timeout error
Selected family......................... : 00, F3 Arch (common)
Model by ID............................. : ST8000AS0002                            
 
Tech Key...
Error executing command  "En Tech" (ABR)
Terminal : error detecting HDD terminal baud rate

Any ideas what could cause this problem?

Posted: **27.12.21, 11:18**

Looks like you have terminal trouble. Is terminal connected ? Is ROM unlocked ?
When drive comes ready a ST8000AS002 should detect as 8B Lamarr.
If drive goes BSY on reading ID, terminal output typical will give you a hint to continue troubleshooting.

Posted: **28.12.21, 15:08**

Thank you for the hint. In the Settings windows on the right hand side I had to enable the additional diag messages.

Code: Select all

FAIL  Servo Op=0100 Resp=0003

So probably dead head.

PC-3000 Forum

ST8000AS0002 Cannot access user data, cannot enable tech mode

ST8000AS0002 Cannot access user data, cannot enable tech mode

Re: ST8000AS0002 Cannot access user data, cannot enable tech mode

Re: ST8000AS0002 Cannot access user data, cannot enable tech mode