Page 1 of 1

ST10000VN0004

Posted: 05.08.19, 15:02
by Bruno
Hi all
I have here a Seagate IronWolf 10TB.
Can someone tell me to which family this drive belongs?
After Utility start everytime "F3" is selected. On list of the supported drives i cat find...
Maybe this drive is not supported?
Thanks for Help.
Bruno

Re: ST10000VN0004

Posted: 05.08.19, 16:25
by Doomer
Tatsu, most likely

Re: ST10000VN0004

Posted: 06.08.19, 13:29
by Bruno
Hi Doomer
I have the newest Version of PC3k, but cannot find Family "Tatsu".
Shure, do you mean Seagate Family?

Re: ST10000VN0004

Posted: 06.08.19, 14:58
by Doomer
Bruno wrote:Source of the post Hi Doomer
Shure, do you mean Seagate Family?

Tatsu is a Seagate family.
Bruno wrote:Source of the post Hi Doomer
I have the newest Version of PC3k, but cannot find Family "Tatsu".

That does not mean it's not Tatsu doesn't it?

Re: ST10000VN0004

Posted: 08.08.19, 10:15
by Bruno
Hi Doomer
Yes you are right. That not mean it's not Tatsu.
But when PC3k not support "Tatsu" Family, i can not select this Family at utility start, and as follows not wrking with the firmware.
Have a nice day.
Bruno

Re: ST10000VN0004

Posted: 08.08.19, 15:56
by Doomer
Bruno wrote:Source of the post
But when PC3k not support "Tatsu" Family, i can not select this Family at utility start, and as follows not wrking with the firmware.

Sounds like a task for tech support