Software can`t control COM port signal level for this USB/COM adapter

Moderator: Nick_TS


protech
Newbie
Posts: 24
Joined: 24.04.15
Reputation: 1 / (11)

Software can`t control COM port signal level for this USB/COM adapter

Postby protech » 06.06.24, 14:13

Hi guys,

I recently upgraded my OS to Win 10 Pro. Now when I try to work on a Seagate cases I am not able to change Terminal : error detecting HDD terminal baud rate. and it shows even in solved cases it doesn't ID any Seagate drives, I tried to change the cable but still Noting I read on another post that i might need Terminal 3.
Here is A terminal message. Please any suggestions would help
Thanks.


Software can`t control COM port signal level for this USB/COM adapter


HDD family detecting...


Family ID: CF
Software can`t control COM port signal level for this USB/COM adapter
Selected family......................... : CF, M15
Model by ID............................. : ST4000LM024-2U817V

Loading default settings!
Use the options dialog to review and save utility settings.
Then press OK!


Family default settings loading!


Tech Key...

Requesting FW Pkg ver ........ M2AEA13B0.SDM4.410014.0001


Detecting SA Phys Sct Size...
Can not detect SA phys secotr size by ATA!
Terminal : error detecting HDD terminal baud rate
Attachments
Capture.PNG
Capture.PNG (14.13 KiB) Viewed 231 times

User avatar
igen
New user
Posts: 52
Joined: 03.07.08
Reputation: 1 / (11)

Re: Software can`t control COM port signal level for this USB/COM adapter

Postby igen » 17.06.24, 14:17

Hello,

On my Windows 10 - both - Terminal 2 and Terminal 3 work correctly.

However, sometimes the terminal stops working.
And then I know that I have to re-solder the pin ends in the terminal connector.

These pins work mechanically (inserting, removing, slight bending) and from time to time a cold solder is formed.
As in the picture below (the points in picture no. 1 are especially important).

If you only have a problem with Seagate drives, then it is a problem with these cold solders behind the Seagate connector.
If the terminal is also invisible under other tools (e.g. Samsung or Toshiba), then also check the ribbon connecting the terminal to the connector.
It also works and can break the wire sometime.
Attachments
1.jpg.jpg
1.jpg.jpg (9.89 KiB) Viewed 146 times
2.jpg.jpg
2.jpg.jpg (9.09 KiB) Viewed 146 times
Any man is liable to err, only a fool persists in error.
Marcus Tullius Cicero


protech
Newbie
Posts: 24
Joined: 24.04.15
Reputation: 1 / (11)

Re: Software can`t control COM port signal level for this USB/COM adapter

Postby protech » 24.06.24, 17:32

That could be the case. Will check with another connector. Thanks


Return to “Arch F3”

Who is online

Users browsing this forum: No registered users and 2 guests