ST3500418AS still loses readiness

[AdasRip]

Hello.
I've patient ST3500418AS. Hdd starts and get at the DRD and DSC status for a fraction of a second. Next get BSY status for a few seconds and over and over again.
I can read single sector while hdd has DRD and DSC status.

Log from terminal:

Rst 0x10M
(P) SATA Reset
PASS
RW: Error processing Performance Parameter File: 203C
Send Status: COMRESET seen
Rst 0x10M
(P) SATA Reset
PASS
RW: Error processing Performance Parameter File: 203C
Send Status: COMRESET seen
Rst 0x10M
...

[Nick_TS]

Hello,

Try to uncheck background processes in Edit HDD ID.

[AdasRip]

It seems that this solution has helped.
Now the hdd restarts every 1 to several minutes but it is enough to copy the sectors.
The copy speed is about 2 MB/s but well that goes.
Thank you veru much.

[studiogsm]

After uncheck all try to change in Utility status System file reading method to ATA direct and all data read in max speed. That helped for me.