Seagate ST3500413AS No HOST FIS-ReadyStatusFlags 2002A185

[CS DATA RECOVERY]

Dear Friends ,

i have case Seagate ST3500413AS BSY
i tried solution No HOST FIS-ReadyStatusFlags (i have took the backup of modulesthen tried Translator regenerator then no result .

Head 1: entries 0 slips 0
Total Entries 1 Total Slips 0

F3 T>/

F3 T>V40
Nonresident GList 0 entries returned
Total entries available: 0
PBA Len Flags Phy Cyl Hd PhySctr SFI

F3 T>
ASCII Diag mode

F3 T>/

F3 T>m0,6,2,,,,,22
Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 16, Max Certify Rewrite Retries = not supported

User Partition Format Successful - Elapsed Time 0 mins 00 secs


F3 T>


any one suggestions pls...


Thanks

[DataMedics]

Did you power cycle it and then try reading sectors afterward? I know this is probably a stupid question.

[CS DATA RECOVERY]

CASE SOLVED

[Amarbir[CDR-Labs]]

Source of the post Hello,
Data Medics,
is it really stupid Question if you know solution give reply other wise leave it .

The problem solved my end.

Wow ,
What a Rude Answer To Such a Senior Data Recovery Expert ,Hats Off To You Sir Keep It Up