HDD ST3360320AS is recognized as a ST340815A no data access

Moderator: Nick_TS


eisltd_adam
Newbie
Posts: 12
Joined: 22.04.10
Reputation: 1 / (10)

HDD ST3360320AS is recognized as a ST340815A no data access

Postby eisltd_adam » 01.02.16, 16:35

Hi guys. I have such a problem. On the PCB, diod was burned. After replacing it HDD starts no problem. That is what I have in terminal. I can't access data at all. Any idea?

T>Reset
4096k x 16 DRAM
GALAXY - 1_Disk S-7A 05-08-07_12:23
HM SFI
!
(P)SATA Reset
AT Er 00 Nwt Er 37 RdWr 00019.00.0012
ATA St 50 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 0000058c 18 0000058c.0.096 8000 0640 ffff 0000
DiskAccess ReadSector EC=43 at 000019.00.0012

CE Log ErrCode=37 LBA=58c Type=5 Add To Pending 58c

User avatar
DataMedics
Advanced user
Posts: 620
Joined: 14.12.15
Reputation: 18 / (177)

Re: HDD ST3360320AS is recognized as a ST340815A no data access

Postby DataMedics » 01.02.16, 17:41

First off are you sure it's an original PCB? If it's recognizing as a completely different model, that's the first thing I'd suspect.


eisltd_adam
Newbie
Posts: 12
Joined: 22.04.10
Reputation: 1 / (10)

Re: HDD ST3360320AS is recognized as a ST340815A no data access

Postby eisltd_adam » 01.02.16, 17:44

Yes, it is original. I have full ID, I can read rom and all modules. Some times it is complaining about not loaded cert. If i click load cert it will find it and load.


Nick_TS
Site Admin
Posts: 302
Joined: 01.04.13
Reputation: 8 / (78)

Re: HDD ST3360320AS is recognized as a ST340815A no data access

Postby Nick_TS » 08.02.16, 21:06

Hello,

Can read app code by terminal?
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelab.eu.com


Return to “Arch ST10”

Who is online

Users browsing this forum: No registered users and 1 guest