PC-3000 Forum

hi to all
i have a hdd maxtor d540-4k from series quantom / maxtor

hdd detect but no access to lba

module table is below



Selected family................................... : D540X-4K
Selected model.................................... : D540X-K MX4K040H2
Model by ID....................................... : MAXTOR 4K040H2
CP information collection...
Reading CP 8, Phys heads counter.................. : 2
Selected model heads count........................ : 2
Reading CP 10, Zone distribution.................. : Ok
Reading CP 4, FW version.......................... : A08.155L
Module table and module storage reboot...


Module 0E, copy 0................................. : Ok
Module 0E, copy 1................................. : Ok
Module 0E, copy 2................................. : Error
Err: Error reading surface C/H/S/L: -10/0/0/1 (Device error detected (AMN;<bit3>;INF))!
Module 0E, copy 3................................. : Ok
Module 65, copy 0................................. : Ok
Module 65, copy 1................................. : Ok
Module 65, copy 2................................. : Ok
Module 65, copy 3................................. : Ok
Module 06, copy 0................................. : Ok
Module 06, copy 1................................. : Ok
Module 06, copy 2................................. : Error
Err: Error reading surface C/H/S/L: -10/0/3/1 (Device error detected (AMN;<bit3>;INF))!
Module 06, copy 3................................. : Ok
Module 05, copy 0................................. : Ok
Module 05, copy 1................................. : Ok
Module 05, copy 2................................. : Ok
Module 05, copy 3................................. : Ok
Module 00, copy 0................................. : Ok
Module 00, copy 1................................. : Ok
Module 00, copy 2................................. : Ok
Module 00, copy 3................................. : Ok
Module 01, copy 0................................. : Ok
Module 01, copy 1................................. : Ok
Module 01, copy 2................................. : Ok
Module 01, copy 3................................. : Ok
Module 02, copy 0................................. : Ok
Module 02, copy 1................................. : Ok
Module 02, copy 2................................. : Ok
Module 02, copy 3................................. : Ok
Module 03, copy 0................................. : Ok
Module 03, copy 1................................. : Ok
Module 03, copy 2................................. : Ok
Module 03, copy 3................................. : Ok
Module 11, copy 0................................. : Ok
Module 11, copy 1................................. : Ok
Module 11, copy 2................................. : Ok
Module 11, copy 3................................. : Ok
Module 12, copy 0................................. : Ok
Module 12, copy 1................................. : Ok
Module 12, copy 2................................. : Ok
Module 12, copy 3................................. : Ok
Module 13, copy 0................................. : Ok
Module 13, copy 1................................. : Ok
Module 13, copy 2................................. : Ok
Module 13, copy 3................................. : Ok
Module 14, copy 0................................. : Ok
Module 14, copy 1................................. : Ok
Module 14, copy 2................................. : Ok
Module 14, copy 3................................. : Ok
Module 15, copy 0................................. : Ok
Module 15, copy 1................................. : Ok
Module 15, copy 2................................. : Ok
Module 15, copy 3................................. : Error
Err: Error reading surface C/H/S/L: -18/1/189/1 (Device error detected (AMN;<bit3>;INF))!
Module 16, copy 0................................. : Ok
Module 16, copy 1................................. : Ok
Module 16, copy 2................................. : Ok
Module 16, copy 3................................. : Error
Err: Error reading surface C/H/S/L: -18/1/191/1 (Device error detected (AMN;<bit3>;INF))!
Module 17, copy 0................................. : Ok
Module 17, copy 1................................. : Ok
Module 17, copy 2................................. : Ok
Module 17, copy 3................................. : Ok
Module 18, copy 0................................. : Ok
Module 18, copy 1................................. : Ok
Module 18, copy 2................................. : Ok
Module 18, copy 3................................. : Ok
Module 19, copy 0................................. : Ok
Module 19, copy 1................................. : Ok
Module 19, copy 2................................. : Ok
Module 19, copy 3................................. : Ok
Module 1A, copy 0................................. : Ok
Module 1A, copy 1................................. : Ok
Module 1A, copy 2................................. : Ok
Module 1A, copy 3................................. : Ok
Module 61, copy 0................................. : Ok
Module 61, copy 1................................. : Ok
Module 61, copy 2................................. : Ok
Module 61, copy 3................................. : Ok
Module 6B, copy 0................................. : Ok
Module 6B, copy 1................................. : Ok
Module 6B, copy 2................................. : Ok
Module 6B, copy 3................................. : Ok
Module 66, copy 0................................. : Ok
Module 66, copy 1................................. : Ok
Module 66, copy 2................................. : Ok
Module 66, copy 3................................. : Ok
Module 62, copy 0................................. : Ok
Module 62, copy 1................................. : Ok
Module 62, copy 2................................. : Ok
Module 62, copy 3................................. : Ok
Module 07, copy 0................................. : Error
Err: Error reading surface C/H/S/L: -9/0/325/1 (Device error detected (AMN;<bit3>;INF))!
Module 07, copy 1................................. : Ok
Module 07, copy 2................................. : Ok
Module 07, copy 3................................. : Ok
Module 08, copy 0................................. : Ok
Module 08, copy 1................................. : Ok
Module 08, copy 2................................. : Ok
Module 08, copy 3................................. : Ok
Module 09, copy 0................................. : Ok
Module 09, copy 1................................. : Ok
Module 09, copy 2................................. : Ok
Module 09, copy 3................................. : Ok
Module D7, copy 0................................. : Ok
Module D7, copy 1................................. : Ok
Module D7, copy 2................................. : Ok
Module D7, copy 3................................. : Ok
Module D9, copy 0................................. : Ok
Module D9, copy 1................................. : Ok
Module D9, copy 2................................. : Ok
Module D9, copy 3................................. : Ok
Module 60, copy 0................................. : Ok
Module 60, copy 1................................. : Ok
Module 60, copy 2................................. : Ok
Module 60, copy 3................................. : Error
Err: Error reading surface C/H/S/L: -19/0/112/1 (Device error detected (AMN;TON;<bit3>;INF))!
Module 95, copy 0................................. : Ok
Module 95, copy 1................................. : Error
Err: Error reading surface C/H/S/L: -14/0/211/1 (Device error detected (AMN;<bit3>;INF))!
Module 96, copy 0................................. : Ok
Module 96, copy 1................................. : Ok
Module 94, copy 0................................. : Ok
Module 94, copy 1................................. : Error
Err: Error reading surface C/H/S/L: -14/0/224/1 (Device error detected (AMN;<bit3>;INF))!
Module 20, copy 0................................. : Ok
Module 20, copy 1................................. : Ok
Module 23, copy 0................................. : Ok
Module 23, copy 1................................. : Ok
Module 24, copy 0................................. : Ok
Module 24, copy 1................................. : Ok
Module 25, copy 0................................. : Ok
Module 25, copy 1................................. : Ok
Module 26, copy 0................................. : Ok
Module 26, copy 1................................. : Ok
Module 27, copy 0................................. : Ok
Module 27, copy 1................................. : Ok
Module 28, copy 0................................. : Ok
Module 28, copy 1................................. : Ok
Module 29, copy 0................................. : Ok
Module 29, copy 1................................. : Ok
Module 2A, copy 0................................. : Ok
Module 2A, copy 1................................. : Ok
Module 2B, copy 0................................. : Ok
Module 2B, copy 1................................. : Ok
Module 2C, copy 0................................. : Error
Err: Error reading surface C/H/S/L: -10/0/267/1 (Device error detected (AMN;<bit3>;INF))!
Module 2C, copy 1................................. : Ok
Module 2D, copy 0................................. : Ok
Module 2D, copy 1................................. : Ok
Module 2E, copy 0................................. : Ok
Module 2E, copy 1................................. : Ok
Module 2F, copy 0................................. : Ok
Module 2F, copy 1................................. : Ok
Module 54, copy 0................................. : Ok
Module 54, copy 1................................. : Ok
Module 55, copy 0................................. : Ok
Module 55, copy 1................................. : Error
Err: Error reading surface C/H/S/L: -15/0/59/1 (Device error detected (AMN;<bit3>;INF))!
Module 56, copy 0................................. : Ok
Module 56, copy 1................................. : Ok
Module 30, copy 0................................. : Ok
Module 30, copy 1................................. : Ok
Module E3, copy 0................................. : Ok
Module E3, copy 1................................. : Ok
Module 31, copy 0................................. : Ok
Module 31, copy 1................................. : Ok
Module 33, copy 0................................. : Ok
Module 33, copy 1................................. : Ok
Module 3E, copy 0................................. : Ok
Module 3E, copy 1................................. : Ok
Module 37, copy 0................................. : Ok
Module 37, copy 1................................. : Ok
Module 36, copy 0................................. : Ok
Module 36, copy 1................................. : Ok
Module D3, copy 0................................. : Ok
Module D3, copy 1................................. : Ok
Module 34, copy 0................................. : Error
Err: Error reading surface C/H/S/L: -11/0/235/1 (Device error detected (AMN;<bit3>;INF))!
Module 34, copy 1................................. : Ok
Module 3F, copy 0................................. : Error
Err: Error reading surface C/H/S/L: -11/0/241/1 (Device error detected (AMN;<bit3>;INF))!
Module 3F, copy 1................................. : Ok
Module 4F, copy 0................................. : Ok
Module 4F, copy 1................................. : Ok
Module 42, copy 0................................. : Error
Err: Error reading surface C/H/S/L: -11/0/331/1 (Device error detected (AMN;<bit3>;INF))!
Module 42, copy 1................................. : Ok
Module 40, copy 0................................. : Ok
Module 40, copy 1................................. : Ok
Module 5C, copy 0................................. : Ok
Module 5C, copy 1................................. : Ok
Module 49, copy 0................................. : Ok
Module 49, copy 1................................. : Error
Err: Error reading surface C/H/S/L: -16/0/122/1 (Device error detected (AMN;<bit3>;INF))!
Module 3D, copy 0................................. : Ok
Module 3D, copy 1................................. : Ok
Module 41, copy 0................................. : Ok
Module 41, copy 1................................. : Ok
Module 35, copy 0................................. : Ok
Module 35, copy 1................................. : Ok
Module 22, copy 0................................. : Ok
Module 22, copy 1................................. : Error
Err: Error reading surface C/H/S/L: -16/0/220/1 (Device error detected (AMN;<bit3>;INF))!
Module 32, copy 0................................. : Ok
Module 32, copy 1................................. : Ok
Module 47, copy 0................................. : Ok
Module 47, copy 1................................. : Error
Err: Error reading surface C/H/S/L: -16/0/235/1 (Device error detected (AMN;<bit3>;INF))!
Module 4D, copy 0................................. : Ok
Module 4D, copy 1................................. : Ok
Module 4E, copy 0................................. : Ok
Module 4E, copy 1................................. : Ok
Module 4C, copy 0................................. : Ok
Module 4C, copy 1................................. : Ok
Module 93, copy 0................................. : Ok
Module 93, copy 1................................. : Ok
Module 21, copy 0................................. : Ok
Module 21, copy 1................................. : Ok
Module 73, copy 0................................. : Ok
Module 73, copy 1................................. : Ok
Module 73, copy 2................................. : Ok
Module 73, copy 3................................. : Ok
Module 71, copy 0................................. : Ok
Module 71, copy 1................................. : Ok
Module 71, copy 2................................. : Ok
Module 71, copy 3................................. : Ok
Module 74, copy 0................................. : Ok
Module 74, copy 1................................. : Ok
Module 74, copy 2................................. : Ok
Module 74, copy 3................................. : Ok
Module 76, copy 0................................. : Ok
Module 76, copy 1................................. : Ok
Module 76, copy 2................................. : Ok
Module 76, copy 3................................. : Ok
Module 77, copy 0................................. : Ok
Module 77, copy 1................................. : Ok
Module 77, copy 2................................. : Ok
Module 77, copy 3................................. : Ok
Module C0, copy 0................................. : Ok
Module C0, copy 1................................. : Ok
Module C1, copy 0................................. : Ok
Module C1, copy 1................................. : Ok
Module C2, copy 0................................. : Ok
Module C2, copy 1................................. : Ok
Module A3, copy 0................................. : Ok
Module A3, copy 1................................. : Ok
Module A3, copy 2................................. : Ok
Module A3, copy 3................................. : Ok
Module A4, copy 0................................. : Ok
Module A4, copy 1................................. : Ok
Module A4, copy 2................................. : Ok
Module A4, copy 3................................. : Ok
Module A5, copy 0................................. : Ok
Module A5, copy 1................................. : Ok
Module A5, copy 2................................. : Ok
Module A5, copy 3................................. : Ok
Module B1, copy 0................................. : Ok
Module B1, copy 1................................. : Ok
Module B2, copy 0................................. : Ok
Module B3, copy 0................................. : Error
Err: Error reading surface C/H/S/L: -12/0/15/1 (Device error detected (AMN;<bit3>;INF))!
Module B4, copy 0................................. : Ok
Module B5, copy 0................................. : Ok
Module B6, copy 0................................. : Ok
Module B7, copy 0................................. : Ok
Module B8, copy 0................................. : Ok
Module B9, copy 0................................. : Ok
Module D5, copy 0................................. : Ok
Module D6, copy 0................................. : Ok
Module BA, copy 0................................. : Ok
Module BB, copy 0................................. : Ok
Module BC, copy 0................................. : Ok
Module BD, copy 0................................. : Ok
Module 51, copy 0................................. : Ok
Module 51, copy 1................................. : Error
Err: Error reading surface C/H/S/L: -16/0/344/1 (Device error detected (AMN;<bit3>;INF))!
Module 51, copy 2................................. : Ok
Module 51, copy 3................................. : Ok
Module 52, copy 0................................. : Ok
Module 52, copy 1................................. : Ok
Module 53, copy 0................................. : Ok
Module 53, copy 1................................. : Ok
Module 53, copy 2................................. : Ok
Module 53, copy 3................................. : Ok
Module 4B, copy 0................................. : Error
Err: Error reading surface C/H/S/L: -13/0/51/1 (Device error detected (AMN;<bit3>;INF))!
Module 4B, copy 1................................. : Error
Err: Error reading surface C/H/S/L: -16/1/36/1 (Device error detected (AMN;<bit3>;INF))!
Module CE, copy 0................................. : Error
Err: Error reading surface C/H/S/L: -13/0/63/1 (Device error detected (<bit5>;BBK))!
Module CE, copy 1................................. : Error
Err: Error reading surface C/H/S/L: -16/1/39/1 (Device error detected (AMN;<bit3>;INF))!
Module CE, copy 2................................. : Ok
Module CE, copy 3................................. : Error
Err: Error reading surface C/H/S/L: -19/0/269/1 (Device error detected (AMN;<bit3>;INF))!
Module 8C, copy 0................................. : Error
Err: Error reading surface C/H/S/L: -13/0/65/1 (Device error detected (AMN;<bit3>;INF))!
Module 8C, copy 1................................. : Ok



what's that next step?

with thanks
ns

IT could be translator problem, this can be regenerated through plist logs (61 I think?)

Alternative, if you have a donor simply hotswap and image then seek shifts in the image. Very likely drive this age will be FAT or NTFS and both can be worked on in virtual translator in DE

thanks for your help

yes , i found
the first problem was translator
the second problem was weak head

with thanks
NSR