PC-3000 Forum

Posted: **15.12.07, 18:17**

Greetings everybody!

HDD is spinning, cannot hear any knocking and detected by PC3000 UDMA as:

Model: Maxtor ARES C64K
Serial:
Firmware: VAM51JJZ
Capacity: 38.29GB (80 295 529)

It shows following error when trying to start Utility:

Code: Select all

Initialization error
Context: Read roadmap
Content: Device error detected

Is there any chance to get data back from this drive? I don't have the same drive to create a loader. Any suggestions?

Pawel

Posted: **17.12.07, 09:54**

sorry, for delayed answer, but what is with this drive at this moment?
did you solve it?

if no, then :

what did this drive show you = in its Service area test?

Posted: **18.12.07, 13:04**

Hello

At this point I cannot een get into an Utility, I am getting 'Initialization error' message box with [OK} and it gets back to detection screen.
I was hoping that with good loader I can at least diagnose it somehow.

Posted: **19.12.07, 14:33**

Hi all, I got a loader and started the drive on 'Safe Mode', checked SA and it turned out that G-List is damaged. Cleaned it and restarted the drive in normal mode. Data is accessible in Data Extractor.

Greetings all. Pawel

Posted: **13.05.13, 10:50**

Thank you for posting how you were able to recover the data. I have a similar drive that I just fixed.
Frank

PC-3000 Forum

Maxtor ARES 64K 2F020J0 (VAM51JJ0) 'Initialization error'

Maxtor ARES 64K 2F020J0 (VAM51JJ0) 'Initialization error'

Re: Maxtor ARES 64K 2F020J0 (VAM51JJ0) 'Initialization error