Dead Maxtor Diamond plus 9 PCB
Posted: 13.02.20, 20:04
Hello
I work with a Maxtor Diamond plus 9 which I found to have a bad PCB shorted. What I assume is that the CR200 (TVS?) Is dead.
What happens if I remove it? do I need to replace it? can i run the hard drive without it?
I work with a Maxtor Diamond plus 9 which I found to have a bad PCB shorted. What I assume is that the CR200 (TVS?) Is dead.
What happens if I remove it? do I need to replace it? can i run the hard drive without it?