Page 1 of 1

Toshiba MK5072GSX scratched Surface

Posted: 03.10.18, 21:18
by d1d
Hello,

I have a Toshiba 2,5" HDD whit a scratched Surface in the Center of the disk. The HDD is clicking. I have just changed the head but always the same problem. I can see the rom and ram about the com port, but i can't get the data. What i have to do?

Thanks a Lot!

Best wishes Luigi

Re: Toshiba MK5072GSX scratched Surface

Posted: 04.10.18, 14:15
by DataMedics
d1d wrote:Source of the post What i have to do?


Most likely just give up and move on.

Re: Toshiba MK5072GSX scratched Surface

Posted: 06.10.18, 10:41
by d1d
Also when the Surface is scratched only in the middle...? :?
See the pics...
Attachments
20181003_160125.jpg
Surface
20181003_160125.jpg (272.58 KiB) Viewed 15813 times
20181003_152357.jpg
HDD Cover
20181003_152357.jpg (8.81 KiB) Viewed 15813 times

Re: Toshiba MK5072GSX scratched Surface

Posted: 08.10.18, 08:58
by AJ2008
top surface is surface '0' and as far as I am aware you need this surface to be OK to initialize it. As most SA is stored in PCB, maybe you can place patient PCB on donor to init donor PCB, then hotswap it to your patient and try reading? Not sure this will work though but I do not think you have many options available...

Re: Toshiba MK5072GSX scratched Surface

Posted: 08.10.18, 13:20
by Tawfeek
AJ2008 wrote:Source of the post top surface is surface '0' and as far as I am aware you need this surface to be OK to initialize it. As most SA is stored in PCB, maybe you can place patient PCB on donor to init donor PCB, then hotswap it to your patient and try reading? Not sure this will work though but I do not think you have many options available...

i thought the button head is the 0

Re: Toshiba MK5072GSX scratched Surface

Posted: 09.10.18, 15:04
by Sergey_TS
Tawfeek, Head0 is on the top here as was correctly mentioned above :(

AJ2008, but what about original P-list (DD)...? :?

Re: Toshiba MK5072GSX scratched Surface

Posted: 09.10.18, 17:16
by Tawfeek
Sergey_TS wrote:Source of the post Tawfeek, Head0 is on the top here as was correctly mentioned above :(


Is head 0 on the top in all HDD kinds or just in Toshiba ?

Re: Toshiba MK5072GSX scratched Surface

Posted: 10.10.18, 11:18
by AJ2008
Sergey_TS wrote:Source of the post Tawfeek, Head0 is on the top here as was correctly mentioned above :(

AJ2008, but what about original P-list (DD)...? :?


I agree this is a problem... :?