MQ01UBD100 problem

Moderators: Filipp_TS, Garry_TS

User avatar
pclab
New user
Posts: 179
Joined: 13.11.13
Reputation: 2 / (23)

MQ01UBD100 problem

Postby pclab » 27.10.17, 08:33

Hi Guys

Got a case here: I changed PCB on this one (USB to SATA) and could get it to ID and I also saved FW (no noises, nothing).
Opened Data Extractor to start to image, and when I pressed the Headmap button, it started clicking like hell.
After power off, it never worked again... Spins up, no click, but always busy....

Did anyone got a problem like this??

User avatar
Filipp_TS
Site Admin
Posts: 256
Joined: 15.04.13
Reputation: 9 / (92)

Re: MQ01UBD100 problem

Postby Filipp_TS » 27.10.17, 10:51

If drive didn't clicked before something your actions but then it starts to doing then it get worsed...
Looks like the Heads are in very bad condition for now.
Better to check this case inside before any next diagnostic steps.
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelab.eu.com

User avatar
pclab
New user
Posts: 179
Joined: 13.11.13
Reputation: 2 / (23)

Re: MQ01UBD100 problem

Postby pclab » 27.10.17, 13:08

Heads look good inside. Didn't looked under microscope tough...

User avatar
Amarbir[CDR-Labs]
Advanced user
Posts: 783
Joined: 03.08.09
Reputation: 8 / (80)

Re: MQ01UBD100 problem

Postby Amarbir[CDR-Labs] » 27.10.17, 19:05

pclab wrote:Source of the post Heads look good inside. Didn't looked under microscope tough...


Well,
Look around the sliders and on the surface of them at 30x to 40x magnification
Regards
Amarbir S Dhillon ,CDR Labs [ Chandigarh ,India ]
DataRecovery - The Affordable Way In India
Visit - > http://www.chandigarhdatarecovery.com My Facebook - > https://www.facebook.com/chandigarhdatarecovery


Ghanem
Newbie
Posts: 12
Joined: 05.10.17
Reputation: 1 / (8)

Re: MQ01UBD100 problem

Postby Ghanem » 28.10.17, 13:59

Dear brother, the head must be changed
GHANEM
Data recovery services in Egypt
00201115230554


Return to “Toshiba native”

Who is online

Users browsing this forum: No registered users and 2 guests