MQ02ABF050H cannot read sector

[thanhtn]

Hi all
I am having a Toshiba MQ02ABF050H hard drive
it boots up looks so ok
but sector cannot be read
I have done like instruction https://blog.acelaboratory.com/2045.html
and link https://blog.acelaboratory.com/pc-3000- ... rives.html
and link https://forum.acelaboratory.com/viewtop ... 147&t=7732
but all failed
help me please!

[northwind]

Does terminal say
SIGNATURE SCAN FAILED
?

[thanhtn]

@nothwind Didn't see that message

[northwind]

Could you connect terminal and power up the drive? And post screenshot of terminal window here?

[AJ2008]

Looks like a NAND issue to me, needs to be flushed over terminal

[thanhtn]

Could you connect terminal and power up the drive? And post screenshot of terminal window here?

there is a notice like in the picture, my friend

[thanhtn]

Source of the post Looks like a NAND issue to me, needs to be flushed over terminal

Can you guide me to fix it?

[MasterT]

Toshiba SSHD (Hybrid drives)

Work with Service Area --> HDD Configuration Changing --> Flash Permanent Cache --> OFF
Or issue >NVA command in terminal and Restart Drive.

[AJ2008]

Source of the post

Source of the post Looks like a NAND issue to me, needs to be flushed over terminal

Can you guide me to fix it?

Source of the post Toshiba SSHD (Hybrid drives)

Work with Service Area --> HDD Configuration Changing --> Flash Permanent Cache --> OFF
Or issue >NVA command in terminal and Restart Drive.

[thanhtn]

Toshiba SSHD (Hybrid drives)

Work with Service Area --> HDD Configuration Changing --> Flash Permanent Cache --> OFF
Or issue >NVA command in terminal and Restart Drive.

Flash permanent cache parameter: it was faded and cannot be turned on or off
MQ02xxx I think it's not supported

[Filipp_TS]

It's supported.
And NAND can be disabled - that's a solution.
As was mentioned - connect terminal adapter, launch Toshiba utility and select ang MQ****H family name (important that 'H' in the end of family name).
then go to Work with Service Area --> HDD Configuration Changing --> Flash Permanent Cache --> OFF as was mentioned.
Then check sector access - should be available.