Toshiba MQ01ABD100H can''t read sectors

odedshankar · Postby **odedshankar** » 31.01.17, 06:29

Hi Folks,

I have a Toshiba MQ01ABD100H which identified properly, but i can't read any of the sectors.
When reading the CP modules, there was one error - CP FE failed to read.

Would love to hear any suggestions or if someone had some experience with a similar case.
Is it possible to write an FE module from a donor drive or re-generate it somehow?

Cheers

odedshankar · Postby **odedshankar** » 31.01.17, 06:33

B.T.W - I already tried the Toshiba Translator Regeneration and it didn't work:
viewtopic.php?f=147&t=7732

lcoughey · Postby **lcoughey** » 31.01.17, 14:35

when you mirror in DE, do you choose to read via utility with corrupt g-list option?

odedshankar · Postby **odedshankar** » 31.01.17, 21:49

yes, did that and it but still all sectors are not read properly - all yellow - it works in most of the cases but this one is quite unique

Postby **Filipp_TS** » 13.02.17, 13:10

As you can see in model name of this drive - it's SSHD drive, and probably it have a problem with the NAND - so, try to switch off NAND and you get an access to users area.

odedshankar · Postby **odedshankar** » 14.02.17, 04:29

thanks Filipp, I'll update to the new version and give it a go.

PC-3000 Forum