WD40EZRZ-00GXCB0 SED DRIVE LOCKED ERROR

Data recovery from Hard Disk Drives with logical problems

Moderator: Alex_TS


gpgeorge
Newbie
Posts: 28
Joined: 13.07.16
Reputation: 0 / (1)

WD40EZRZ-00GXCB0 SED DRIVE LOCKED ERROR

Postby gpgeorge » 14.03.20, 07:16

Model - WD40EZRZ-00GXCB0
ROM Ver - 0002001P

Techno mode key
Techno mode key......................... : Ok

Debug Stop Code reading................. : Status sector reading error Device Error Detected: "VSC ERR VSC CMD SET NOT ENABLED"

RAM:
HDD Info reading........................ : Ok
Heads number............................ : 6
Cyl Count............................... : 256

Zone allocation table................... : Ok
SA SPT.................................. : 2800

ROM:
Read ROM................................ : HDDs ROM reading error Data request error Device Error Detected: "SED DRIVE LOCKED"

Service area:
Permanent overlay....................... : Not loaded
SA dir reading (ID)..................... : SED DRIVE LOCKED
SA dir reading (ABA/CHS)................ : No S/A regions info avalable
SA Access............................... : NONE

Configuration reading................... : Module 02 not found

HDD Identification reading ............. : Ok

Allow module 02 access
Module ID 0B reading error Data request error Device Error Detected: "SED DRIVE LOCKED"


Freakazoid
Newbie
Posts: 30
Joined: 06.09.18
Reputation: 0 / (2)

Re: WD40EZRZ-00GXCB0 SED DRIVE LOCKED ERROR

Postby Freakazoid » 15.03.20, 12:57

You need a unlock PCB


gpgeorge
Newbie
Posts: 28
Joined: 13.07.16
Reputation: 0 / (1)

Re: WD40EZRZ-00GXCB0 SED DRIVE LOCKED ERROR

Postby gpgeorge » 15.03.20, 13:22

POSSIBLE TO UNLOCK USING PC3000? IF NOT WHERE CAN GET UNLOCKED PCB?


gpgeorge
Newbie
Posts: 28
Joined: 13.07.16
Reputation: 0 / (1)

Re: WD40EZRZ-00GXCB0 SED DRIVE LOCKED ERROR

Postby gpgeorge » 16.03.20, 05:22

PCB NO-800055


Return to “Data Extractor”

Who is online

Users browsing this forum: No registered users and 1 guest