PC3000 installed, but status register lights do not show

crobison · Postby **crobison** » 03.10.17, 19:28

The green power status light works, but the register lights do not come on...

DataMedics · Postby **DataMedics** » 03.10.17, 20:55

Do you have a confirmed good drive attached to the channel?

crobison · Postby **crobison** » 04.10.17, 01:11

Drives are good..

hipo · Postby **hipo** » 04.10.17, 15:39

Did you connect Power cable to the board?

Blizzard · Postby **Blizzard** » 05.10.17, 01:27

Is it possible you are on channel1 but you have channel0 power connected to the drive? Have you checked the connections at the PCIe card?

jojo2012 · Postby **jojo2012** » 05.10.17, 14:37

Try changing PCIe slot, and checking the cable connections, also reverse the sata cables.

PC-3000 Forum