PC-3000 Forum

I have had a few source drives make PC3000 beep from time to time. However I have 2 X Toshibas that are making PC3000 card beep constant. As soon as I start copying to target disk it starts until finished.

Is this an error I should be concerned about ? It's annoying at best... Again this is PC3000 making the long constant beep, not the hard drives.

Thanks in advance !

PC3000 Express

Oh dam, it actually ran for a while then popped out this error : Access violation at address 4006D736 in module 'Vcl50.bpl'. Read of address 16039EC3

I sometimes get these random errors. Usually just closing the PC-3000 software and reopening it solves the issue.

I have had this happen if power is lost to the card "SATA power" Had a loose connector , and the card itself beeped.

the beep appear with there are electric problem, check pcb or sata attach