Spin Point

Moderator: Garry_TS

New Topic

59 topics

Topics

Replies

Author

Views

Last post

Steps for hot-swapping all Samsung drive families:

Last post by Maxim_TS « 31.07.17, 12:12
Replies: 26
1

2
by ACE_Admin » 13.01.09, 15:02
26 Replies

by ACE_Admin Author

48822 Views

Last post BSIT, If we don't know which modules are necessary for Hot-swap, we must move all modules except the overlays.
by Maxim_TS View the latest post
31.07.17, 12:12
Samsung HM502JX/VPK - 500GB

Last post by SGdata « 19.07.24, 17:13
Replies: 1
by lukes1582 » 19.07.24, 08:15

1 Replies

by lukes1582 Author

531 Views

Last post There are two pads on the left of pcb where you solder TX and RX.
by SGdata View the latest post
19.07.24, 17:13
Error recovery ctrl

Last post by emir_has « 02.08.23, 08:11

Attachment(s) by emir_has » 02.08.23, 08:11

0 Replies

by emir_has Author

128383 Views

Last post Hi Is this option Error recovery ctrl in Samsung utility same or similar as TLER on WD ustility? How to setup timing f
by emir_has View the latest post
02.08.23, 08:11
HD161GJ-HD102GJ slow read problem

Last post by anekakeck « 09.03.23, 18:29
Replies: 1
by jand_krmnl » 08.03.23, 08:01

1 Replies

by jand_krmnl Author

4094 Views

Last post That seems like an issue with the PCB.. check the PCB is native and has not been changed before. You can do a straight s
by anekakeck View the latest post
09.03.23, 18:29
Samsung HD400LD IDE

Last post by Hddex « 05.04.22, 16:19
Replies: 2
Attachment(s) by Hddex » 16.03.22, 20:09

2 Replies

by Hddex Author

3106 Views

Last post Yes, it is also the same in the manual (see attached). (MA SL CS all engraved on the brown plastic) I have the jumper on
by Hddex View the latest post
05.04.22, 16:19
Samsung HS082H8

Last post by Hddex « 05.04.22, 16:00
Replies: 3
Attachment(s) by Hddex » 10.03.22, 21:01

3 Replies

by Hddex Author

17657 Views

Last post Yes, I was able to extract it with a DE task. Thank you
by Hddex View the latest post
05.04.22, 16:00
ha252hi drive family

Last post by baldric « 11.12.21, 12:35

by baldric » 11.12.21, 12:35

0 Replies

by baldric Author

7422 Views

Last post hi does anyone knows what's the family for ha252hi/mk2 thanks!
by baldric View the latest post
11.12.21, 12:35
ST1500LM006 HN-M151RAD very slow

Last post by vodata « 10.03.21, 12:20
Replies: 6
by vodata » 07.03.21, 16:14

6 Replies

by vodata Author

4107 Views

Last post That's what I've done, searching by myself, but that returns intervals in sqlite, not file listing, and one could be in
by vodata View the latest post
10.03.21, 12:20
Sumsung Head Swap

Last post by noushad « 25.01.21, 11:07
Replies: 3
by noushad » 22.01.21, 14:17

3 Replies

by noushad Author

3269 Views

Last post Thank You
by noushad View the latest post
25.01.21, 11:07
St1000LM024 Problem

Last post by Filipp_TS « 13.01.21, 13:12
Replies: 1
by AdasRip » 10.11.20, 19:21

1 Replies

by AdasRip Author

3836 Views

Last post Hello, Try to send 'LE' terminal command. If behavior still the same try to initialize drive with changed Heads map in
by Filipp_TS View the latest post
13.01.21, 13:12
ST1000LM024 BSY

Last post by Filipp_TS « 24.08.20, 12:02
Replies: 4
by karan » 31.01.20, 14:31

4 Replies

by karan Author

5014 Views

Last post As soon as you get ready state try to reduce number of ReadRetry (it makes in RAM): https://i.imgur.com/1K7z8Y4.jpg The
by Filipp_TS View the latest post
24.08.20, 12:02
ST2000LM003 HN-M201RAD/D1 - LED 110B - Unlatch Fail -UD..StuckLD..Stuck -

Last post by northwind « 20.08.20, 08:31
Replies: 1
by LoboXus » 11.08.20, 23:50

1 Replies

by LoboXus Author

3171 Views

Last post Did you check the ramp? I have seen this error when the ramp was slightly deformed and heads couldn't unload from ramp.
by northwind View the latest post
20.08.20, 08:31
strange problem on HN-M101MBB

Last post by Filipp_TS « 29.05.20, 10:08
Replies: 1
by mojimorady » 17.03.20, 11:43

1 Replies

by mojimorady Author

3499 Views

Last post Hello, Go to Utility status window (next button after power-on/off button) then open "Reading parameters" and move scro
by Filipp_TS View the latest post
29.05.20, 10:08
heads donor Samsung HM501IX/VP4

Last post by northwind « 13.04.20, 10:05
Replies: 1
by pad-dataservice » 11.04.20, 22:26

1 Replies

by pad-dataservice Author

2605 Views

Last post Match the preamp version (or use compatible version) and the head count and you should be good to go.
by northwind View the latest post
13.04.20, 10:05
ST1000LM024 UNKNOWN PROBLEM

Last post by Amarbir[CDR-Labs] « 12.01.20, 15:11
Replies: 8
by mojimorady » 17.12.19, 16:32

8 Replies

by mojimorady Author

6868 Views

Last post Well, In This Case Try and Boot FRom Plater 00 , head 00
by Amarbir[CDR-Labs] View the latest post
12.01.20, 15:11
ST1000LM024 - BSY - Tried everything, nothing works :(

Last post by SlingShot « 14.12.19, 15:42
Replies: 5
Attachment(s) by SlingShot » 07.12.19, 20:32

5 Replies

by SlingShot Author

6333 Views

Last post So tried the hotswap with overlay writing, still stuck in BSY. Read Modules awaken.jpg Read Modules errors.jpg write mo
by SlingShot View the latest post
14.12.19, 15:42
Need ROM Samsung 1TB F3 Family | HE103SJ FW: 1AJ30001

Last post by Maxim_TS « 28.02.19, 13:39
Replies: 2
by GuideRecovery » 29.01.19, 16:37

2 Replies

by GuideRecovery Author

8984 Views

Last post GuideRecovery, try to hot-swap using a compatible donor drive, here you may see the steps: http://blog.acelaboratory.com
by Maxim_TS View the latest post
28.02.19, 13:39
HD161HJ not Spin up

Last post by hassan « 18.01.19, 08:40

by hassan » 18.01.19, 08:40

0 Replies

by hassan Author

6671 Views

Last post hello i have Samsung HD161HJ Drive try to spin up i see this message in terminal : SPW 1.5G Link ok! Status : BF80 Sta
by hassan View the latest post
18.01.19, 08:40
Seagate MacOSX - Samsung ST500LM012 - Reading Error

Last post by Filipp_TS « 11.01.19, 10:05
Replies: 1
by d1d » 10.12.18, 20:21

1 Replies

by d1d Author

6383 Views

Last post Hello, Looks like drive in the Ready state. Based on the sequence of bad sectors the possible reason is damages directl
by Filipp_TS View the latest post
11.01.19, 10:05
busy samsung hd161hj

Last post by GuideRecovery « 27.11.18, 11:15
Replies: 1
Attachment(s) by ankarakecis » 21.11.18, 13:30

1 Replies

by ankarakecis Author

6542 Views

Last post issue could be with SA, a hotswap can help you further diagnose it.
by GuideRecovery View the latest post
27.11.18, 11:15
Technical Support Request - SAMSUNG-HD502HJ-S27DJ9GZA00533

Last post by Amarbir[CDR-Labs] « 08.11.18, 15:57
Replies: 1
Attachment(s) by DRCSL » 08.11.18, 12:45

1 Replies

by DRCSL Author

6368 Views

Last post Hi, If You Have Active Service Create a TS Ticket And Staff Of Acelab Will Look Into It
by Amarbir[CDR-Labs] View the latest post
08.11.18, 15:57
Samsung HM500JJ/M busy problem

Last post by AJ2008 « 07.11.18, 11:42
Replies: 1
by procurement » 07.11.18, 10:33

1 Replies

by procurement Author

6349 Views

Last post These drives will output a terminal log that might give a better idea of the fault - can you post this log here?
by AJ2008 View the latest post
07.11.18, 11:42
Samsung HM500JI problem

Last post by odedshankar « 19.10.18, 12:07
Replies: 7
by odedshankar » 18.10.18, 08:21

7 Replies

by odedshankar Author

11264 Views

Last post this drive is super weird, i started imaging and did about 10% in good speed, then started to slow with many errors, i t
by odedshankar View the latest post
19.10.18, 12:07
Hello Ineed Burn for HD161HJ/SRP

Last post by betty « 09.10.18, 08:45
Replies: 2
by Filipp_TS » 28.03.18, 17:01

2 Replies

by Filipp_TS Author

8201 Views

Last post Re: Hello Ineed Burn for HD161HJ/SRP
by betty View the latest post
09.10.18, 08:45
ST4000LM024

Last post by Filipp_TS « 25.09.18, 11:23
Replies: 3
by Tweety » 06.09.18, 13:19

3 Replies

by Tweety Author

7291 Views

Last post Common questions means common answers. Heads swap procedure depends on your skill and not related with PC-3000. Data rec
by Filipp_TS View the latest post
25.09.18, 11:23
HN-M101MBB - bad head 0, how to disable SA copy 0?

Last post by Filipp_TS « 25.09.18, 11:20
Replies: 2
by Martin281 » 16.09.18, 21:37

2 Replies

by Martin281 Author

6610 Views

Last post This article describes the procedure: https://blog.acelaboratory.com/pc-3000- ... n-ram.html
by Filipp_TS View the latest post
25.09.18, 11:20
Samsung Spinpoint ST1000LM024 Stuck at BSY, no terminal

Last post by Filipp_TS « 24.08.18, 17:10
Replies: 1
by datahaze » 17.07.18, 00:10

1 Replies

by datahaze Author

7142 Views

Last post Hello, It's Samsung HN-M101MBB model name drive. And it should be prepared in Samsung utility (as you did). Terminal r
by Filipp_TS View the latest post
24.08.18, 17:10
Samsung HN-M101MBB slider stuck on insde platter

Last post by murtazabawa « 15.07.18, 19:58
Replies: 2
Attachment(s) by murtazabawa » 09.07.18, 10:04

2 Replies

by murtazabawa Author

7515 Views

Last post Thank you all for all your reply and suggestions. Removed platters with the help of stickers, used the plastic stick to
by murtazabawa View the latest post
15.07.18, 19:58
Advices for a not exact donor ST1500LM010

Last post by recovery « 16.04.18, 16:14
Replies: 6
by recovery » 11.04.18, 17:06

6 Replies

by recovery Author

9678 Views

Last post Thanks, I will try to find a donor.
by recovery View the latest post
16.04.18, 16:14
BUSY HD082GJ

Last post by Filipp_TS « 06.04.18, 14:21
Replies: 1
by shahi » 05.04.18, 14:48

1 Replies

by shahi Author

6431 Views

Last post Hello, It can be problem with firmware or with heads/surface. Check in database is there compatible BURN resources and
by Filipp_TS View the latest post
06.04.18, 14:21
Samsung ST1000LM024 - head stack compatibility

Last post by Filipp_TS « 19.03.18, 09:55
Replies: 1
by diskeom » 16.03.18, 18:49

1 Replies

by diskeom Author

7117 Views

Last post >Do you have any informations about matching heads preamplifier ? Preamp info you can see immediately after power on in
by Filipp_TS View the latest post
19.03.18, 09:55
ST2000LM003 Donor head requirements

Last post by Amarbir[CDR-Labs] « 25.02.18, 09:54
Replies: 1
by avalanche » 11.02.18, 23:47

1 Replies

by avalanche Author

6862 Views

Last post Hi, if you could post a picture of your patient and donors top label and their roms i can help you find donor for th
by Amarbir[CDR-Labs] View the latest post
25.02.18, 09:54
HN-M101MBB stops reading on a bad sector

Last post by Amarbir[CDR-Labs] « 25.02.18, 09:17
Replies: 2
by murphman » 13.02.18, 20:15

2 Replies

by murphman Author

8240 Views

Last post Well, Its encountering a bad sector and trying to add entry to glist
by Amarbir[CDR-Labs] View the latest post
25.02.18, 09:17
ST500LM012 Bad sector every 279 LBA's exactly

Last post by Amarbir[CDR-Labs] « 25.02.18, 08:09
Replies: 2
by DNC_Scotty » 23.02.18, 22:33

2 Replies

by DNC_Scotty Author

7562 Views

Last post Well, One thing i think we all should remember the outer area in hdd is always the source of trouble map it and clo
by Amarbir[CDR-Labs] View the latest post
25.02.18, 08:09
Need help with a M7E 2.5'' HM161GI rom problem

Last post by jasminehell « 24.11.17, 05:47

by jasminehell » 24.11.17, 05:47

0 Replies

by jasminehell Author

6629 Views

Last post got a samsung 160g HM161GI dont spin here is the code ----------------------------------------- Apple Macpro RAID conne
by jasminehell View the latest post
24.11.17, 05:47
Samsung HM502JX 500GB Disk Family

Last post by digitalsupport « 23.11.17, 20:15
Replies: 1
by antonvn » 23.11.17, 13:12

1 Replies

by antonvn Author

6492 Views

Last post Its a M7S2, look at motor label will in most cases tell you the family.
by digitalsupport View the latest post
23.11.17, 20:15
Samsung Spin point ST1000LM024 NO MOVEMENT

Last post by dataq « 22.11.17, 12:19
Replies: 2
by CS DATA RECOVERY » 02.08.16, 05:21

2 Replies

by CS DATA RECOVERY Author

8779 Views

Last post Did you manage to get a solution to this.
by dataq View the latest post
22.11.17, 12:19
ST1000LM024 BSY problem

Last post by Masterclass « 18.08.17, 09:52
Replies: 5
by emir_has » 15.08.17, 20:02

5 Replies

by emir_has Author

10413 Views

Last post Address to ACE help ( open a ticket)
by Masterclass View the latest post
18.08.17, 09:52
ST1000LM024 can read in sector edit but not DE

Last post by osity « 04.04.17, 19:17
Replies: 6
by osity » 18.03.17, 18:28

6 Replies

by osity Author

10385 Views

Last post what does "If You Have Created Head Map Deselect That Not Deselect Heads" mean? How would you disable the headmap after
by osity View the latest post
04.04.17, 19:17
How do I determine the preamp type on a damaged samsung 2.5"

Last post by Amarbir[CDR-Labs] « 22.03.17, 04:04
Replies: 3
by osity » 20.03.17, 20:53

3 Replies

by osity Author

8846 Views

Last post Hi, if you use donor board on patient and do not get preamp error your head swap is good to go and also you can check
by Amarbir[CDR-Labs] View the latest post
22.03.17, 04:04
ST1000LM024 - burn resources

Last post by Ayti « 21.02.17, 15:37

Attachment(s) by Ayti » 21.02.17, 15:37

0 Replies

by Ayti Author

7404 Views

Last post Hello everybody, P/N: E1352-G84A-B9YAS I'm looking for burners for the following drive (see picture). your burn resour
by Ayti View the latest post
21.02.17, 15:37
Samsung HD161HJ can't read ROM

Last post by Amarbir[CDR-Labs] « 26.12.16, 17:36
Replies: 1
by pclab » 17.12.16, 19:09

1 Replies

by pclab Author

8090 Views

Last post pclab , these are same drives or a new case
by Amarbir[CDR-Labs] View the latest post
26.12.16, 17:36
Samsung SP1203N Busy

Last post by pclab « 12.12.16, 15:20
Replies: 4
by pclab » 26.01.16, 11:50

4 Replies

by pclab Author

10459 Views

Last post Bad PCB. Swapped for another.
by pclab View the latest post
12.12.16, 15:20
samsung head bad case

Last post by Filipp_TS « 28.11.16, 16:18
Replies: 1
Attachment(s) by vijayan » 28.11.16, 06:59

1 Replies

by vijayan Author

8010 Views

Last post Hello, This drive haven't something errors about dead head(s). Try to check users area access. Whole area is not access
by Filipp_TS View the latest post
28.11.16, 16:18
Samsung Bad Head

Last post by caputlatinum « 09.09.16, 17:21
Replies: 7
by pclab » 26.03.16, 16:23

7 Replies

by pclab Author

12951 Views

Last post Has anyone seen this terminal output before? Are there any recommendations on the issue I'm having? The drive just spins
by caputlatinum View the latest post
09.09.16, 17:21
Write ROM by terminal

Last post by DataMedics « 31.05.16, 22:05
Replies: 6
by pclab » 18.04.16, 22:43

6 Replies

by pclab Author

11644 Views

Last post As an interesting experiment, I bet you can physically move the ROM to a Seagate or WD PCB which had the same size ROM
by DataMedics View the latest post
31.05.16, 22:05
Samsun St1000LM024/AV!

Last post by Garry_TS « 29.04.16, 12:37
Replies: 5
by Nadpc3k » 11.12.15, 15:49

5 Replies

by Nadpc3k Author

11626 Views

Last post Hi all, means incompatible heads. Check first terminal strings at donor and patient, they must be same. also means
by Garry_TS View the latest post
29.04.16, 12:37
Autoreassign [ On/Off ] - While Cloning M8E Series HDD Topic is solved

Last post by lcoughey « 07.04.16, 14:48
Replies: 9
Attachment(s) by Amarbir[CDR-Labs] » 31.03.16, 08:41

9 Replies

by Amarbir[CDR-Labs] Author

143373 Views

Last post When I went in this morning, didn't need to search. It pops up under new threads - https://www.data-medics.com/forum/au
by lcoughey View the latest post
07.04.16, 14:48
led 5b 0000

Last post by Garry_TS « 24.11.15, 22:13
Replies: 3
by sepid » 30.06.15, 16:33

3 Replies

by sepid Author

10295 Views

Last post Please tell me the model of drive. In general, you can try to write burn resources (FFlash or HT code) or make a hot s
by Garry_TS View the latest post
24.11.15, 22:13
Hotswap for a HD103SJ

Last post by Garry_TS « 24.11.15, 22:00
Replies: 4
by dobrevjetser » 22.08.14, 17:00

4 Replies

by dobrevjetser Author

26993 Views

Last post Please check this article viewtopic.php?f=160&t=6531
by Garry_TS View the latest post
24.11.15, 22:00

New Topic

59 topics

Return to Board Index

Who is online

Users browsing this forum: No registered users and 1 guest

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Spin Point

Who is online

Forum permissions

Login • Register