Arch F3

Moderator: Nick_TS

New Topic

493 topics

Page 1 of 10
- Jump to page:
1
2
3
4
5
…
10
Next

Topics

Replies

Author

Views

Last post

Seagate ST3250310NS Fw.HPG2 F3 family Lock Led problem

Last post by dsolutions « 13.01.17, 01:37
Replies: 18
1

2
by Powermax » 16.05.11, 14:04
18 Replies

by Powermax Author

36035 Views

Last post And also the model, Serial, and firmware are incorrect. Model: ST31000524AS P/N: 5VPC6XAR Firmware: HP64 (Shows As 0803
by dsolutions View the latest post
13.01.17, 01:37
Momentus 7200.4 half capacity after translator regen.

Last post by drdoc « 10.02.12, 18:29
Replies: 20
1

2
Attachment(s) by kezo » 30.09.10, 10:25
20 Replies

by kezo Author

72839 Views

Last post Re: Momentus 7200.4 half capacity after translator regen.
by drdoc View the latest post
10.02.12, 18:29
need help formatted ST1000LM035

Last post by italyassistance « 13.10.25, 16:15
Replies: 1
by cis_rec » 12.10.25, 03:43

1 Replies

by cis_rec Author

640 Views

Last post if disk is re-write, u have only possibility with raw recovery,actually not exist second level traslator in seagate mode
by italyassistance View the latest post
13.10.25, 16:15
Seagate ST2000LM007 Full ID, but BSY after 1 sector READ

Last post by italyassistance « 02.10.25, 15:01
Replies: 1
Attachment(s) by gameboybin » 02.10.25, 08:45

1 Replies

by gameboybin Author

360 Views

Last post Save all modules, and deactive backgroud activity in module 93 if head 0 write, if head 0 dont write, found preamp versi
by italyassistance View the latest post
02.10.25, 15:01
Seagate AFH

Last post by DCDL « 29.09.25, 12:26
Replies: 20
1

2
Attachment(s) by MasterT » 19.01.19, 09:24
20 Replies

by MasterT Author

27870 Views

Last post I've had good results with adjusting AFH and rosewood drives, however only when getting moldy sectors (invalid data). I'
by DCDL View the latest post
29.09.25, 12:26
how to unlock ST22000NM001E-3HM103 (no need to save data)

Last post by ictsec.areait « 26.08.25, 11:03

by ictsec.areait » 26.08.25, 11:03

0 Replies

by ictsec.areait Author

561 Views

Last post Hi, I've a couple of ST22000NM001E drive that are locked, this is what I get about security running hdparm -I: Security:
by ictsec.areait View the latest post
26.08.25, 11:03
Software can`t control COM port signal level for this USB/COM adapter

Last post by Filipp_TS « 04.08.25, 17:29
Replies: 4
Attachment(s) by protech » 06.06.24, 14:13

4 Replies

by protech Author

1743 Views

Last post Hello, 1) you using terminal ver.2 which doesn't allow to supply 1.8V, that's why utility showing a warning message. 2
by Filipp_TS View the latest post
04.08.25, 17:29
hdd becomes ready but after that continue messgae going in terminal

Last post by Filipp_TS « 04.08.25, 17:24
Replies: 1
Attachment(s) by parshwa » 02.07.25, 10:07

1 Replies

by parshwa Author

3891 Views

Last post Hello, Try to short the reading channel on the PCB for getting stable terminal access, then pay attention on Translator
by Filipp_TS View the latest post
04.08.25, 17:24
Does ST1000LM048 support Trim ?

Last post by cis_rec « 01.07.25, 15:05

Attachment(s) by cis_rec » 01.07.25, 15:05

0 Replies

by cis_rec Author

2636 Views

Last post i received an HDD "ST1000LM048" as shown in the attached the client formatted it by mistake and when i tried to recover
by cis_rec View the latest post
01.07.25, 15:05
ST1500LM LED:0x000000BD FAddr:0x0000780F

Last post by AJ2008 « 25.06.25, 14:54
Replies: 1
by gameboybin » 07.06.25, 18:17

1 Replies

by gameboybin Author

548 Views

Last post You will need to short read channels to get T> to work with MC
by AJ2008 View the latest post
25.06.25, 14:54
ST2000LM007 after QUICK FORMAT

Last post by gameboybin « 20.06.25, 18:10
Replies: 4
by Tweety » 28.06.21, 12:48

4 Replies

by Tweety Author

2493 Views

Last post I am having a similar case. Really looking for a solution. I mean there is a solution. Just not really public
by gameboybin View the latest post
20.06.25, 18:10
Rosewood ST1000LM035 SMR Format

Last post by gameboybin « 19.06.25, 16:09
Replies: 1
by beefstrudel » 19.12.23, 13:49

1 Replies

by beefstrudel Author

114782 Views

Last post Did you get the answer?? I am also curious about this case
by gameboybin View the latest post
19.06.25, 16:09
Seagate 2tb EB1

Last post by NSRGroup « 11.06.25, 16:14
Replies: 4
by NSRGroup » 10.06.25, 11:17

4 Replies

by NSRGroup Author

752 Views

Last post I think should be regenerate translator but din't work terminal !!!? is it posible regenerate tranlator without termina
by NSRGroup View the latest post
11.06.25, 16:14
ST4000LM024 MCMT Table corrupted : issues during reading sysfiles

Last post by hddr49 « 02.06.25, 15:53

by hddr49 » 02.06.25, 15:53

0 Replies

by hddr49 Author

2715 Views

Last post Hi there. I have a ST4000LM024 who start busy. Terminal shows MCMT Table corrupted and No HOST FIS-ReadyStatusFlags I
by hddr49 View the latest post
02.06.25, 15:53
ST500LT012 Yarra- Spinup Failure ServoLoopCode=0x0000007F

Last post by digitalsupport « 05.05.25, 07:08
Replies: 5
Attachment(s) by gameboybin » 11.04.25, 08:39

5 Replies

by gameboybin Author

986 Views

Last post Check heads back in donor drive. If they work, heads are not compatible. If they don´t work you medie damage in patient
by digitalsupport View the latest post
05.05.25, 07:08
SeagateArch F3 ST2000DM006 Please help

Last post by pc_fox2009 « 28.04.25, 14:27

Attachment(s) by pc_fox2009 » 28.04.25, 14:27

0 Replies

by pc_fox2009 Author

2808 Views

Last post Seagate Arch F3 ST2000DM006-2DM164 Power is damaged and the reason is the ROM .... Is there a way to do it without hav
by pc_fox2009 View the latest post
28.04.25, 14:27
RoseWood after Rom patched "Verify ALF FW signature failed"

Last post by datasalvage « 28.04.25, 04:01
Replies: 15
1

2
Attachment(s) by Hemendra » 08.09.17, 05:45
15 Replies

by Hemendra Author

14962 Views

Last post hello same here with ST8000. did you managed to fix the ROM?
by datasalvage View the latest post
28.04.25, 04:01
Rosewood_AF , LED:0x000000BB FAddr:0x00004300 error

Last post by roham « 22.04.25, 07:40
Replies: 7
by Issam » 20.04.24, 14:14

7 Replies

by Issam Author

2359 Views

Last post Hello dear I also see the LED BB error in the terminal. Of course, my hard drive is ST6000NM0115. If you find a solution
by roham View the latest post
22.04.25, 07:40
Surprising and unexpected problem after rewrite sysfile...

Last post by gameboybin « 11.04.25, 08:30
Replies: 2
by igen » 03.10.23, 19:46

2 Replies

by igen Author

3342 Views

Last post I have similar case. The drive won't want to start. It keeps hanging. When powering gives 2 clicks then stops. The motor
by gameboybin View the latest post
11.04.25, 08:30
SEAGATE ST500LT012 No terminal access

Last post by gameboybin « 10.04.25, 10:41
Replies: 3
by hddr49 » 06.02.17, 16:46

3 Replies

by hddr49 Author

6735 Views

Last post I am having the same exact issue. The issue stays the same after head swapping
by gameboybin View the latest post
10.04.25, 10:41
Seagate Secure Locked

Last post by kaninitechnology « 01.04.25, 11:57

by kaninitechnology » 01.04.25, 11:57

0 Replies

by kaninitechnology Author

2843 Views

Last post Hi All I Have a Seagate 1TB External Which Has Locked With Seagate Secure locked. I Have Password. so how to unlock th
by kaninitechnology View the latest post
01.04.25, 11:57
ST2000DM008

Last post by AJ2008 « 13.03.25, 17:53
Replies: 3
by davidswa1 » 31.01.25, 21:36

3 Replies

by davidswa1 Author

16594 Views

Last post PCB number I imagine will be same. I mean serial number from HDD label or base
by AJ2008 View the latest post
13.03.25, 17:53
Seagate ST500LT012 - SIM ERROR 2011

Last post by AdasRip « 22.02.25, 19:02
Replies: 2
by AdasRip » 15.02.25, 20:29

2 Replies

by AdasRip Author

1214 Views

Last post The drive spindle starts, heads doesn't knock somehow but stops after a while. Without heads the spindle works all the t
by AdasRip View the latest post
22.02.25, 19:02
ST6000NM0044

Last post by Popica « 22.02.25, 07:42

by Popica » 22.02.25, 07:42

0 Replies

by Popica Author

3710 Views

Last post i have this model, Seagate Enterprise Capacity 3.5 HDD v4 SED FW on label : G003 FW on PC3000: G00B inside rom i see : G
by Popica View the latest post
22.02.25, 07:42
ST2000LM007 Update Mask

Last post by Paulfromsurrey « 06.02.25, 19:19
Replies: 3
by Dataman » 01.10.18, 18:14

3 Replies

by Dataman Author

5907 Views

Last post You found any solution for this I have the drive with same issue
by Paulfromsurrey View the latest post
06.02.25, 19:19
ST4000LM024

Last post by emir_has « 03.01.25, 14:43

by emir_has » 03.01.25, 14:43

0 Replies

by emir_has Author

3260 Views

Last post Hi I have this drive from 2020. Client reported that the drive had failed and stop working. After examining I found out
by emir_has View the latest post
03.01.25, 14:43
ST2000DM005 can read sector only with utility mode

Last post by datasalvage « 19.12.24, 08:00

by datasalvage » 19.12.24, 08:00

0 Replies

by datasalvage Author

3392 Views

Last post Hi im strugling with this drive 1 week already! it the begining the drive was BSY. iv patched and backup sys file 1b,35
by datasalvage View the latest post
19.12.24, 08:00
ST500LM030 ( DWF, ERR, ABR ) Flags

Last post by cis_rec « 12.11.24, 17:53
Replies: 1
Attachment(s) by cis_rec » 11.11.24, 20:08

1 Replies

by cis_rec Author

849 Views

Last post case solved thank you
by cis_rec View the latest post
12.11.24, 17:53
ST12000NM001J-2TY113

Last post by cis_rec « 25.10.24, 09:27

Attachment(s) by cis_rec » 25.10.24, 09:27

0 Replies

by cis_rec Author

3226 Views

Last post any one dealt with the ROM for this HDD ST12000NM001J-2TY113 ?
by cis_rec View the latest post
25.10.24, 09:27
Boot Code: Can not get current address!

Last post by Ayman « 11.08.24, 12:59
Replies: 1
by techchef1 » 09.05.23, 06:05

1 Replies

by techchef1 Author

117184 Views

Last post boot terminal is locked on new Seagate HDDs so you cannot read/write rom using pc3000 you have to use programmer.
by Ayman View the latest post
11.08.24, 12:59
Can someone unlock this B5 Cimarron ROM for me?

Last post by beefstrudel « 24.07.24, 20:26
Replies: 4
Attachment(s) by beefstrudel » 19.07.24, 13:37

4 Replies

by beefstrudel Author

1504 Views

Last post No status register, terminal output: SEA3 Boot ROM 2.0 (08/01/2016) Copyright Seagate 2016 Flash boot code Digital
by beefstrudel View the latest post
24.07.24, 20:26
Usb terminal 3 adapter

Last post by einstein9 « 21.07.24, 10:52
Replies: 1
by italyassistance » 17.07.24, 16:15

1 Replies

by italyassistance Author

1115 Views

Last post why not ask the support directly?
by einstein9 View the latest post
21.07.24, 10:52
Support request for unlock seagate rosewood hard disk.

Last post by codecode « 11.07.24, 10:32
Replies: 4
Attachment(s) by DRCSL » 07.12.23, 08:24

4 Replies

by DRCSL Author

119204 Views

Last post Dear Masterclass, It SED drive. I have go to TCG Opal menu and it say enter password, unfortunaly it seem HDD can not
by codecode View the latest post
11.07.24, 10:32
Seagate ST2000DM005 gone ZERO filled

Last post by AT3000_user « 10.07.24, 01:12
Replies: 4
by AT3000_user » 08.07.24, 08:55

4 Replies

by AT3000_user Author

1304 Views

Last post I cleared MCMT table using the U10 command. Repowered, still all zero.
by AT3000_user View the latest post
10.07.24, 01:12
SimError-Remaining in Boot FW

Last post by AT3000_user « 09.07.24, 07:30
Replies: 7
by AT3000_user » 14.06.24, 02:27

7 Replies

by AT3000_user Author

3615 Views

Last post Thanx Igen, Replaced the PCB and swapped out the ROM. The same error. Replaced the head with a compatible one. No help
by AT3000_user View the latest post
09.07.24, 07:30
ST8000DM004 stays BSY

Last post by protech « 24.06.24, 17:41

Attachment(s) by protech » 24.06.24, 17:41

0 Replies

by protech Author

1281 Views

Last post Hello Ace and everyone, I have this case I'm stuck with. Its a ST8000DM004 stays BSY so I had to apply the NO HOST "BUSY
by protech View the latest post
24.06.24, 17:41
Seagate ST1000LM035-1RK172 - Capacity 0

Last post by DRCSL « 04.06.24, 15:19
Replies: 2
by Bio » 29.05.24, 15:49

2 Replies

by Bio Author

2080 Views

Last post Hello friend, Did you get a solution to this question ? I also got a hard drive with this problem, do data recovery..
by DRCSL View the latest post
04.06.24, 15:19
Seagate DWF (Device Fault State) No Editing Objects are found

Last post by beefstrudel « 30.05.24, 19:26
Replies: 1
Attachment(s) by gameboybin » 14.05.24, 06:38

1 Replies

by gameboybin Author

1305 Views

Last post Did you try reading copy 1 instead of 0?
by beefstrudel View the latest post
30.05.24, 19:26
ST8000DM004 can read sector only under utility mode HELP

Last post by protech « 22.05.24, 17:11
Replies: 7
Attachment(s) by datasalvage » 18.01.24, 02:56

7 Replies

by datasalvage Author

3400 Views

Last post Hi guys, Have a ST8000DM004 here. Spins up and keeps going and no funny sounds. No ID and stays busy. The blog for "No
by protech View the latest post
22.05.24, 17:11
Seagate 0MB problem

Last post by gameboybin « 10.05.24, 08:45
Replies: 4
Attachment(s) by d1d » 11.02.22, 11:02

4 Replies

by d1d Author

11462 Views

Last post I have exact same problem. After changing heads> Clicks a few times and got ready on Double down
by gameboybin View the latest post
10.05.24, 08:45
Seagate ST6000DM004 cannot change Head Map

Last post by digitalsupport « 08.05.24, 07:23
Replies: 1
Attachment(s) by gameboybin » 08.05.24, 04:37

1 Replies

by gameboybin Author

1018 Views

Last post What family did you select in utility?
by digitalsupport View the latest post
08.05.24, 07:23
ST8000DM004 - Cannot set up head map info ROM

Last post by gameboybin « 08.05.24, 04:23
Replies: 3
Attachment(s) by DCC-PC3K » 18.05.22, 15:14

3 Replies

by DCC-PC3K Author

3236 Views

Last post Yeah. I have the same issue ST6000DM004 Changed heads. I know the platter 08 is damages so i need to turn off heads 08.
by gameboybin View the latest post
08.05.24, 04:23
ST6000VX0023 ROM

Last post by kezo « 02.05.24, 16:42

by kezo » 02.05.24, 16:42

0 Replies

by kezo Author

1158 Views

Last post Hi! I lookink for ST6000VX0023-2EF110 FW: SC60 ROM. THX!
by kezo View the latest post
02.05.24, 16:42
Diagnostic Port Unlock issue

Last post by O.S « 25.04.24, 20:54
Replies: 8
Attachment(s) by datacare » 22.11.19, 05:29

8 Replies

by datacare Author

8250 Views

Last post My PC-3000UDMA Ver 7.0X has no DE function, It takes me a long time of saving to buy , and few thousand dollars to buy 1
by O.S View the latest post
25.04.24, 20:54
rom

Last post by drmicro « 25.04.24, 19:05
Replies: 2
by drmicro » 25.04.24, 00:39

2 Replies

by drmicro Author

1019 Views

Last post rom, it's damaged, i put suprepro machine, i read it, i wrote it to file, i need to fix it in the seagate program, the P
by drmicro View the latest post
25.04.24, 19:05
all 2.5 Seagate drives stays in BSY State

Last post by protech « 23.04.24, 09:06

Attachment(s) by protech » 23.04.24, 09:06

0 Replies

by protech Author

1273 Views

Last post Hi there, I need a bit of help identifying the problem with this cases, all 2.5 Seagate drives stays in BSY State after
by protech View the latest post
23.04.24, 09:06
ST500LM000 SSHD

Last post by Consultant « 22.04.24, 19:31
Replies: 5
by chipnova » 30.06.20, 13:33

5 Replies

by chipnova Author

4900 Views

Last post With SSHD, the same firmware revision donor PCB has to be used. Different firmware won't work.
by Consultant View the latest post
22.04.24, 19:31
ST3000DM007 FAIL Servo Op=0100 Resp=0003

Last post by ajay.mudhgill « 29.03.24, 17:08
Replies: 1
by DRNZ » 29.03.24, 03:03

1 Replies

by DRNZ Author

1708 Views

Last post better to replace the heads,short cuts are not always favorable. good luck
by ajay.mudhgill View the latest post
29.03.24, 17:08
M15 - can't read ROM

Last post by goooz « 06.03.24, 23:37
Replies: 1
by goooz » 06.03.24, 17:09

1 Replies

by goooz Author

1247 Views

Last post OK - Solution found in Video! Will check it with Programmer tomorrow.
by goooz View the latest post
06.03.24, 23:37
ST2000LX001 LED:0x000000BD FAddr:0x000059D8 HELP PLEASE

Last post by osity « 22.02.24, 02:52
Replies: 7
Attachment(s) by datasalvage » 15.02.24, 02:47

7 Replies

by datasalvage Author

4089 Views

Last post Those above contacts are for the motor. Are you trying to short the motor? Short after initialization. You may want to i
by osity View the latest post
22.02.24, 02:52

New Topic

493 topics

Page 1 of 10
- Jump to page:
1
2
3
4
5
…
10
Next

Return to Board Index

Who is online

Users browsing this forum: No registered users and 6 guests

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Arch F3

Who is online

Forum permissions

Login • Register