ST3000DM001-1E6166

[Anas]

hello i have this HDD : ST3000DM001-1E6166
3TB & 6 Head
it take time to be ready
this terminal msg :

Boot 0x40M
Spin Up
Trans.

Spin Up
SpinOK
(P) SATA Reset


i read the ROM and modules but can't read the DT
when i try to read DT is see this :

DT 0000 (Flash ROM), Read Adaptive Parameters File (RAP).............. : Error
Error : Rq Rd DT part ID 0, Offs 0x0 err! Tech state 0x72, 0x05260207
DT 0001 (Flash ROM), Controller Adaptive Parameters File (CAP)........ : Ok
DT 0004 (Flash ROM), Servo Adaptive Parameter File (SAP).............. : Error
Error : Rq Rd DT part ID 4, Offs 0x0 err! Tech state 0x72, 0x05260207
DT 0005 (Flash ROM), Servo Firmware Table............................. : Ok
DT 0008 (Flash ROM)................................................... : Error
Error : Error requesting command state "RD CP part" (Drive is not ready)
Drive not ready
DT reading process completed
Result............................................ : Error

Backup of service information completed

and in terminal i see this :

(S) SATA Reset

LED:000000EE FAddr:001047F4
LED:000000EE FAddr:001047F4
LED:000000EE FAddr:001047F4

and the drive becomes BSY
what is the problem and what i do ?

[AJ2008]

You need access to service area to deal with this, but this is Grenada with locked terminal that needs patching.

[Nick_TS]

Try this solution: http://blog.acelab.eu.com/pc-3000-f ... drive.html

[Anas]

thanks i do that it work very well