what is this code for ???

[mojimorady]

Dear guru
hi
I am involved with a Seagate 500GB ST500DM002 ,
after connecting to pc3000 and powering it on , it spins , shows READY state but when i try to enter seagate F3 window ,
PC3000 asks me to "run Utility"
no id , no capacity ,....

in terminal tab i have this message :

....

InitiateMarkPendingReallocateRequest for disc_lba: 0106A717!.
(DOS) Read Error - C4090082
InitiateMarkPendingReallocateRequest for disc_lba: 0106A718!.
(DOS) Read Error - C4090082
InitiateMarkPendingReallocateRequest for disc_lba: 0106A719!.
(DOS) Read Error - C4090082
InitiateMarkPendingReallocateRequest for disc_lba: 0106A71A!.
(DOS) Read Error - C4090082
InitiateMarkPendingReallocateRequest for disc_lba: 0106A71B!.
(DOS) Read Error - C4090082
InitiateMarkPendingReallocateRequest for disc_lba: 0106A71C!.
(DOS) Read Error - C4090082
InitiateMarkPendingReallocateRequest for disc_lba: 0106A71D!.
(DOS) Read Error - C4090082
InitiateMarkPendingReallocateRequest for disc_lba: 0106A71E!.
(DOS) Read Error - C4090082
InitiateMarkPendingReallocateRequest for disc_lba: 0106A71F!.
(DOS) Read Error - C4090082
InitiateMarkPendingReallocateRequest for disc_lba: 0106A720!.
(DOS) Read Error - C4090082
InitiateMarkPendingReallocateRequest for disc_lba: 0106A721!.
....

what is this error for ???
any suggestion ???

best regards

Mojimorady

[mojimorady]

after powering off/on the drive I have this in terminal

Boot 0x10M
Spin Up[0x00000000][0x0000B67C][0x0000BA10]
Trans.

Rst 0x10M
MC Internal LPC Process
Spin Up
(P) SATA Reset

MCMTFileHandler: EXCEPTION: Failed MCMT read request
MCMTFileHandler: EXCEPTION: Failed MCMT read request
Dither

regards

Mojimorady

[Continuum]

I have the same issue. Anyone been able to fix this?